GO Mechanical
Login
Register
Dark Mode
Brightness
Profile
Edit Profile
Messages
My favorites
My Updates
Logout
Filter
Recent
Hot!
Most votes
Most answers
Most views
Previous GATE
Featured
Most viewed questions
0
answers
0
votes
GATE Mechanical 2023 | Question: 30
The figure shows a thin-walled open-top cylindrical vessel of radius $r$ and wall thickness $t$. The vessel is held along the brim and contains a constant-density liquid to height $h$ from the base. Neglect atmospheric pressure, the weight ... magnitudes of axial wall stress $\left(\sigma_1\right)$ and circumferential wall stress $\left(\sigma_2\right)$ on $y$?
The figure shows a thin-walled open-top cylindrical vessel of radius $r$ and wall thickness $t$. The vessel is held along the brim and contains a constant-density liquid ...
admin
4.4k
points
admin
asked
May 21, 2023
Others
gateme-2023
+
–
0
answers
0
votes
GATE Mechanical 2021 Set 1 | Question: 24
The figure shows an arrangement of a heavy propeller shaft in a ship. The combined polar mass moment of inertia of the propeller and the shaft is $\text{100 kg.m}^{2}$. The propeller rotates at $\omega =12$ $\text{rad/s}$. The ... moment generated on the shaft due to the motion described is ________ $\text{N.m}(\textit{round off to the nearest integer}$).
The figure shows an arrangement of a heavy propeller shaft in a ship. The combined polar mass moment of inertia of the propeller and the shaft is $\text{100 kg.m}^{2}$. T...
gatecse
1.6k
points
gatecse
asked
Feb 22, 2021
Others
gateme-2021-set1
numerical-answers
+
–
0
answers
0
votes
GATE2015-1-20
Which one of the following types of stress-strain relationship best describes the behaviour of brittle materials, such as ceramics and thermosetting plastics, ($\sigma$ = stress and $\varepsilon$ = strain)?
Which one of the following types of stress-strain relationship best describes the behaviour of brittle materials, such as ceramics and thermosetting plastics, ($\sigma$ =...
Arjun
28.5k
points
Arjun
asked
Feb 24, 2017
Applied Mechanics and Design
gateme-2015-set1
applied-mechanics-and-design
mechanics-of-materials
stress-strain
+
–
0
answers
0
votes
GATE Mechanical 2022 Set 1 | Question: 27
An $L$-shaped elastic member $\text{ABC}$ with slender arms $\text{AB}$ and $\text{BC}$ of uniform cross-section is clamped at end $A$ and connected to a pin at end $C$. The pin remains in continuous contact with and is constrained to move in a smooth ... $\frac{5P}{8}$, and upwards $\frac{P}{4}$, and downwards $\frac{3P}{4}$, and upwards
An $L$-shaped elastic member $\text{ABC}$ with slender arms $\text{AB}$ and $\text{BC}$ of uniform cross-section is clamped at end $A$ and connected to a pin at end $C$. ...
Arjun
28.5k
points
Arjun
asked
Feb 15, 2022
Others
gateme-2022-set1
+
–
0
answers
0
votes
GATE2019 ME-1: 13
In a casting process, a vertical channel through which molten metal flows downward from pouring basin to runner for reaching the mold cavity is called blister sprue riser pin hole
In a casting process, a vertical channel through which molten metal flows downward from pouring basin to runner for reaching the mold cavity is calledblistersprueriserpin...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set1
materials-manufacturing-and-industrial-engineering
casting-forming-and-joining-process
+
–
1
answers
1
votes
GATE Mechanical 2021 Set 1 | GA Question: 6
Oxpeckers and rhinos manifest a symbiotic relationship in the wild. The oxpeckers warn the rhinos about approaching poachers, thus possibly saving the lives of the rhinos. Oxpeckers also feed on the parasitic ticks found on rhinos. In the ... source, rhinos may be saved from the poachers Oxpeckers save the lives of poachers, rhinos save their own lives
Oxpeckers and rhinos manifest a symbiotic relationship in the wild. The oxpeckers warn the rhinos about approaching poachers, thus possibly saving the lives of the rhinos...
gatecse
1.6k
points
gatecse
asked
Feb 22, 2021
Verbal Aptitude
gateme-2021-set1
verbal-ability
easy
verbal-reasoning
passage-reading
+
–
1
answers
1
votes
GATE Mechanical 2021 Set 2 | GA Question: 3
A digital watch $\text{X}$ beeps every $30$ seconds while watch $\text{Y}$ beeps every $32$ seconds. They beeped together at $\text{10 AM}$. The immediate next time that they will beep together is ____ $\text{10.08 AM}$ $\text{10.42 AM}$ $\text{11.00 AM}$ $\text{10.00 PM}$
A digital watch $\text{X}$ beeps every $30$ seconds while watch $\text{Y}$ beeps every $32$ seconds. They beeped together at $\text{10 AM}$.The immediate next time that t...
go_editor
5.0k
points
go_editor
asked
Mar 1, 2021
Quantitative Aptitude
gateme-2021-set2
numerical-ability
clock-time
+
–
1
answers
1
votes
GATE Mechanical 2021 Set 2 | GA Question: 1
Five persons $\text{P, Q, R, S}$ and $\text{T}$ are to be seated in a row, all facing the same direction, but not necessarily in the same order. $\text{P}$ and $\text{T}$ ... at the second position from the left end of the row. The number of distinct seating arrangements possible is: $2$ $3$ $4$ $5$
Five persons $\text{P, Q, R, S}$ and $\text{T}$ are to be seated in a row, all facing the same direction, but not necessarily in the same order. $\text{P}$ and $\text{T}$...
go_editor
5.0k
points
go_editor
asked
Mar 1, 2021
Quantitative Aptitude
gateme-2021-set2
numerical-ability
permutation-and-combination
seating-arrangements
+
–
0
answers
0
votes
GATE Mechanical 2021 Set 2 | Question: 31
A plane frame $\text{PQR}$ (fixed at $\text{P}$ and free at $\text{R}$) is shown in the figure. Both members ($\text{PQ}$ and $\text{QR}$) have length, $\text{L}$, and flexural rigidity, $\text{EI}$. Neglecting the effect of axial stress and transverse shear, the ... , is $\frac{5FL^{3}}{3EI}$ $\frac{4FL^{3}}{3EI}$ $\frac{2FL^{3}}{3EI}$ $\frac{FL^{3}}{3EI}$
A plane frame $\text{PQR}$ (fixed at $\text{P}$ and free at $\text{R}$) is shown in the figure. Both members ($\text{PQ}$ and $\text{QR}$) have length, $\text{L}$, and fl...
go_editor
5.0k
points
go_editor
asked
Mar 1, 2021
Others
gateme-2021-set2
+
–
0
answers
0
votes
GATE Mechanical 2022 Set 2 | Question: 4
Given $\int_{-\infty }^{\infty } e^{-x^{2}} dx = \sqrt{\pi }.$ If $a$ and $b$ are positive integers, the value of $\int_{-\infty }^{\infty } e^{-a\left ( x+b \right )^{2}} dx$ is _______________. $\sqrt{\pi a}$ $\sqrt{\frac{\pi }{a}}$ $b\sqrt{\pi a}$ $b\sqrt{\frac{\pi }{a}}$
Given $\int_{-\infty }^{\infty } e^{-x^{2}} dx = \sqrt{\pi }.$If $a$ and $b$ are positive integers, the value of $\int_{-\infty }^{\infty } e^{-a\left ( x+b \right )^{2}}...
Arjun
28.5k
points
Arjun
asked
Feb 15, 2022
Others
gateme-2022-set2
+
–
0
answers
0
votes
GATE2019 ME-1: 5
A flat-faced follower is driven using a circular eccentric cam rotating at a constant angular velocity $\omega$. At time $t=0$, the vertical position of the follower is $y(0)=0$, and the system is in the configuration shown below: The vertical position of the follower face, $(y(t)$ is given by $e \sin \omega t$ $e(1+ \cos 2 \omega t)$ $e(1- \cos \omega t)$ $e \sin 2 \omega t$
A flat-faced follower is driven using a circular eccentric cam rotating at a constant angular velocity $\omega$. At time $t=0$, the vertical position of the follower is $...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Applied Mechanics and Design
gateme-2019-set1
applied-mechanics-and-design
+
–
0
answers
0
votes
GATE Mechanical 2014 Set 2 | Question: 33
Consider a flywheel whose mass $M$ is distributed almost equally between a heavy, ring-like rim of radius $R$ and a concentric disk-like feature of radius $R/2$. Other parts of the flywheel, such as spokes, etc, have negligible mass. The best ... for $α$, if the moment of inertia of the flywheel about its axis of rotation is expressed as $αMR^2$, is _______
Consider a flywheel whose mass $M$ is distributed almost equally between a heavy, ring-like rim of radius $R$ and a concentric disk-like feature of radius $R/2$. Other pa...
Arjun
28.5k
points
Arjun
asked
Feb 19, 2017
Applied Mechanics and Design
gateme-2014-set2
numerical-answers
applied-mechanics-and-design
theory-of-machines
flywheels-and-governors
+
–
0
answers
0
votes
GATE Mechanical 2018 Set 2 | GA Question: 6
Forty students watched films A, B and C over a week. Each student watched either only one film or all three. Thirteen students watched film A, sixteen students watched film B and nineteen students watched film C. How many students watched all three films? $0$ $2$ $4$ $8$
Forty students watched films A, B and C over a week. Each student watched either only one film or all three. Thirteen students watched film A, sixteen students watched fi...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Analytical Aptitude
gateme-2018-set2
analytical-aptitude
venn-diagrams
+
–
0
answers
0
votes
GATE Mechanical 2022 Set 1 | Question: 18
Which of the following additive manufacturing technique(s) can use a wire as a feedstock material? Stereolithography Fused deposition modeling Selective laser sintering Directed energy deposition processes
Which of the following additive manufacturing technique(s) can use a wire as a feedstock material?StereolithographyFused deposition modelingSelective laser sinteringDirec...
Arjun
28.5k
points
Arjun
asked
Feb 15, 2022
Others
gateme-2022-set1
multiple-selects
+
–
0
answers
0
votes
GATE2019 ME-2: 13
Which one of the following modifications of the simple ideal Rankine cycle increases the thermal efficiency and reduces the moisture content of the steam at the turbine outlet? Increasing the boiler pressure Decreasing the boiler pressure Increasing the turbine inlet temperature decreasing the condenser pressure
Which one of the following modifications of the simple ideal Rankine cycle increases the thermal efficiency and reduces the moisture content of the steam at the turbine o...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Thermodynamics
gateme-2019-set2
thermodynamics
fluid-mechanics-and-thermal-science
+
–
0
answers
0
votes
GATE Mechanical 2014 Set 4 | Question: 55
A butt weld joint is developed on steel plates having yield and ultimate tensile strength of $500$ $MPa$ and $700$ $MPa$, respectively. The thickness of the plates is $8$ $mm$ and width is $20$ $mm$. Improper selection of ... $mm$ depth along the weld. The maximum transverse tensile load (in $kN$) carrying capacity of the developed weld joint is _______
A butt weld joint is developed on steel plates having yield and ultimate tensile strength of $500$ $MPa$ and $700$ $MPa$, respectively. The thickness of the plates is $8$...
Arjun
28.5k
points
Arjun
asked
Feb 19, 2017
Applied Mechanics and Design
gateme-2014-set4
numerical-answers
applied-mechanics-and-design
machine-design
rivited-and-welded-joints
+
–
0
answers
1
votes
GATE2016-1-28
The value of the integral $\displaystyle{\int_{-\infty }^{\infty }\frac{\sin x}{x^2+2x+2}}dx$ evaluated using contour integration and the residue theorem is $\displaystyle{\frac{-\pi \sin(1)}{e}}\\$ $\displaystyle{\frac{-\pi \cos (1)}{e}} \\$ $\displaystyle{\frac{\sin (1)}{e}} \\$ $\displaystyle{\frac{\cos (1)}{e}}$
The value of the integral $$\displaystyle{\int_{-\infty }^{\infty }\frac{\sin x}{x^2+2x+2}}dx$$ evaluated using contour integration and the residue theorem is$\displaysty...
Arjun
28.5k
points
Arjun
asked
Feb 24, 2017
Calculus
gateme-2016-set1
calculus
definite-integrals
+
–
1
answers
0
votes
GATE2019 ME-2: 1
In matrix equation $[A] \{X\}=\{R\}$, $[A] = \begin{bmatrix} 4 & 8 & 4 \\ 8 & 16 & -4 \\ 4 & -4 & 15 \end{bmatrix} \{X\} = \begin{Bmatrix} 2 \\ 1 \\ 4 \end{Bmatrix} \text{ and} \{ R \} = \begin{Bmatrix} 32 \\ 16 \\ 64 \end{Bmatrix}$ One of the eigen values of matrix $[A]$ is $4$ $8$ $15$ $16$
In matrix equation $[A] \{X\}=\{R\}$,$[A] = \begin{bmatrix} 4 & 8 & 4 \\ 8 & 16 & -4 \\ 4 & -4 & 15 \end{bmatrix} \{X\} = \begin{Bmatrix} 2 \\ 1 \\ 4 \end{Bmatrix} \text{...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Linear Algebra
gateme-2019-set2
linear-algebra
matrices
eigen-values
+
–
0
answers
0
votes
GATE Mechanical 2023 | Question: 22
A linear transformation maps a point $(x, y)$ in the plane to the point $(\hat{x}, \hat{y})$ according to the rule $\hat{x}=3 y, \quad \hat{y}=2 x .$ Then, the disc $x^2+y^2 \leq 1$ gets transformed to a region with an area equal to ________. (Rounded off to two decimals) Use $\pi=3.14$
A linear transformation maps a point $(x, y)$ in the plane to the point $(\hat{x}, \hat{y})$ according to the rule$$\hat{x}=3 y, \quad \hat{y}=2 x .$$Then, the disc $x^2+...
admin
4.4k
points
admin
asked
May 21, 2023
Others
gateme-2023
+
–
0
answers
0
votes
GATE Mechanical 2014 Set 2 | Question: 38
Consider the two states of stress as shown in configurations I and II in the figure below. From the standpoint of distortion energy (von-Mises) criterion, which one of the following statements is true? $I$ yields after $II$ $II$ yields after $I$ Both yield simultaneously Nothing can be said about their relative yielding
Consider the two states of stress as shown in configurations I and II in the figure below. From the standpoint of distortion energy (von-Mises) criterion, which one of th...
Arjun
28.5k
points
Arjun
asked
Feb 19, 2017
Mechanics of Materials
gateme-2014-set2
mechanics-of-materials
applied-mechanics-and-design
+
–
1
answers
1
votes
GATE Mechanical 2021 Set 1 | GA Question: 5
The increased consumption of leafy vegetables in the recent months is a clear indication that the people in the state have begun to lead a healthy lifestyle Which of the following can be logically inferred from the information ... leafy vegetables The people in the state have increased awareness of healthy hazards causing by consumption of junk foods
“The increased consumption of leafy vegetables in the recent months is a clear indication that the people in the state have begun to lead a healthy lifestyle”Which of...
gatecse
1.6k
points
gatecse
asked
Feb 22, 2021
Verbal Aptitude
gateme-2021-set1
verbal-ability
verbal-reasoning
statements-follow
+
–
1
answers
1
votes
GATE Mechanical 2024 | GA Question: 2
Find the odd one out in the set: $\{19,37,21,17,23,29,31,11\}$ $21$ $29$ $37$ $23$
Find the odd one out in the set: $\{19,37,21,17,23,29,31,11\}$$21$$29$$37$$23$
admin
4.4k
points
admin
asked
Feb 16
Others
gateme-2024
+
–
1
answers
1
votes
GATE Mechanical 2021 Set 2 | GA Question: 10
The world is going through the worst pandemic in the past hundred years. The air travel industry is facing a crisis, as the resulting quarantine requirement for travelers led to weak demand. In relation to the first ... Second sentence entirely contradicts the first sentence The two statements are unrelated States an effect of the first sentence
The world is going through the worst pandemic in the past hundred years. The air travel industry is facing a crisis, as the resulting quarantine requirement for travelers...
go_editor
5.0k
points
go_editor
asked
Mar 1, 2021
Verbal Aptitude
gateme-2021-set2
verbal-ability
verbal-reasoning
+
–
0
answers
0
votes
GATE2016-1-37
A solid disc with radius $a$ is connected to a spring at a point $d$ above the center of the disc. The other end of the spring is fixed to the vertical wall. The disc is free to roll without slipping on the ground. The mass of the disc is $M$ and the spring constant is $K$. The ... $\displaystyle{\sqrt{\frac{2K(a+d)^2}{Ma^2}}} \\$ $\displaystyle{\sqrt{\frac{K(a+d)^2}{Ma^2}}}$
A solid disc with radius $a$ is connected to a spring at a point $d$ above the center of the disc. The other end of the spring is fixed to the vertical wall. The disc is ...
Arjun
28.5k
points
Arjun
asked
Feb 24, 2017
Applied Mechanics and Design
gateme-2016-set1
applied-mechanics-and-design
machine-design
springs
+
–
0
answers
1
votes
GATE2018-2-51
The arc lengths of a directed graph of a project are as shown in the figure. The shortest path length from node $1$ to node $6$ is __________
The arc lengths of a directed graph of a project are as shown in the figure. The shortest path length from node $1$ to node $6$ is __________
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Operations Research
gateme-2018-set2
numerical-answers
+
–
0
answers
0
votes
GATE2016-2-41
Consider a frictionless, massless and leak-proof plug blocking a rectangular hole of dimensions $2R \times L$ at the bottom of an open tank as shown in the figure. The head of the plug has the shape of a semi-cylinder of radius $R$. The tank is filled with a liquid of density $\rho$ up to the tip ... $2\rho R^2gL(1+\dfrac{\pi }{4}) \\$ $\pi R^2\rho gL \\$ $\dfrac{\pi }{2}\rho R^2gL$
Consider a frictionless, massless and leak-proof plug blocking a rectangular hole of dimensions $2R \times L$ at the bottom of an open tank as shown in the figure. The he...
Arjun
28.5k
points
Arjun
asked
Feb 24, 2017
Fluid Mechanics
gateme-2016-set2
fluid-mechanics-and-thermal-science
fluid-mechanics
+
–
0
answers
0
votes
GATE Mechanical 2023 | Question: 29
A beam of length $L$ is loaded in the $x y-$ plane by a uniformly distributed load, and by a concentrated tip load parallel to the $z$-axis, as shown in the figure. The resulting bending moment distributions about the $y$ ... Which one of the options given depicts qualitatively $\text{CORRECT}$ variations of $M_y$ and $M_z$ along the length of the beam?
A beam of length $L$ is loaded in the $x y-$ plane by a uniformly distributed load, and by a concentrated tip load parallel to the $z$-axis, as shown in the figure. The r...
admin
4.4k
points
admin
asked
May 21, 2023
Others
gateme-2023
+
–
1
answers
0
votes
GATE2019 ME-2: 4
An analytic function $f(z)$ of complex variable $z=x+iy$ may be written as $f(z)=u(x,y)+iv(x,y)$. Then $u(x,y)$ and $v(x,y)$ ...
An analytic function $f(z)$ of complex variable $z=x+iy$ may be written as $f(z)=u(x,y)+iv(x,y)$. Then $u(x,y)$ and $v(x,y)$ must satisfy$\dfrac{\partial u}{ \partial x} ...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Calculus
gateme-2019-set2
calculus
partial-derivatives
complex-variables
analytic-functions
+
–
0
answers
0
votes
GATE2017 ME-2: 43
A calorically perfect gas (specific heat at constant pressure $1000 \: J/kg .K$) enters and leaves a gas turbine with the same velocity. The temperatures of the gas at turbine entry and exit are $1100 \: K $and $400 \: K$, respectively. The power produced is $4.6\: MW$ ... turbine casing. The mass flow rate of the gas (in $kg/s$) through the turbine is $6.14$ $7.00$ $7.50$ $8.00$
A calorically perfect gas (specific heat at constant pressure $1000 \: J/kg .K$) enters and leaves a gas turbine with the same velocity. The temperatures of the gas at tu...
Arjun
28.5k
points
Arjun
asked
Feb 26, 2017
Applications
gateme-2017-set2
fluid-mechanics-and-thermal-science
applications
turbomachinary
+
–
1
answers
0
votes
GATE Mechanical 2014 Set 2 | Question: 46
In an ideal Brayton cycle, atmospheric air (ratio of specific heats, $c_p$/$c_v$ = $1.4$, specific heat at constant pressure = $1.005$ $kJ/kg.K$) at $1$ $bar$ and $300$ $K$ is compressed to $8$ $bar$. The maximum temperature in the cycle ... the heat is supplied at the rate of $80$ $MW$, the mass flow rate (in $kg/s$) of air required in the cycle is _______
In an ideal Brayton cycle, atmospheric air (ratio of specific heats, $c_p$/$c_v$ = $1.4$, specific heat at constant pressure = $1.005$ $kJ/kg.K$) at $1$ $bar$ and $300$ $...
Arjun
28.5k
points
Arjun
asked
Feb 19, 2017
Thermodynamics
gateme-2014-set2
numerical-answers
fluid-mechanics-and-thermal-science
thermodynamics
+
–
0
answers
0
votes
GATE Mechanical 2021 Set 1 | Question: 43
An uninsulated cylindrical wire of radius $\text{1.0 mm}$ produces electric heating at the rate of $\text{5.0 W/m}$. The temperature of the surface of the wire is $75\;^{\circ}C$ when placed in air at $25\;^{\circ}C$. When the wire is ... Wire. The thermal conductivity of $\text{PVC}$ is ______ $\text{W/m.K}$ ($\textit{round off to two decimal places}$).
An uninsulated cylindrical wire of radius $\text{1.0 mm}$ produces electric heating at the rate of $\text{5.0 W/m}$. The temperature of the surface of the wire is $75\;^{...
gatecse
1.6k
points
gatecse
asked
Feb 22, 2021
Others
gateme-2021-set1
numerical-answers
+
–
1
answers
0
votes
GATE2018-1-47
A plane slab of thickness $L$ and thermal conductivity $k$ is heated heated with a fluid on one side $(P)$, and the other side $(Q)$ is maintained at a constant temperature, $T_Q$ of $25^{\circ}C$ ... The steady state temperature, $T_P$ (in $^{\circ}$C) of the side which is exposed to the fluid is _____ (correct to two decimal places)
A plane slab of thickness $L$ and thermal conductivity $k$ is heated heated with a fluid on one side $(P)$, and the other side $(Q)$ is maintained at a constant temperatu...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Heat Transfer
gateme-2018-set1
numerical-answers
heat-transfer
fluid-mechanics-and-thermal-science
+
–
0
answers
0
votes
GATE Mechanical 2022 Set 2 | Question: 8
A structural member under loading has a uniform state of plane stress which is usual notations is given by $\sigma _{x} = 3P, \sigma _{y} = -2P$ and $\tau_{xy} = \sqrt{2}P$, where $P>0$. The yield strength of the material is $350$ ... maximum distortion energy theory) is $70$ $\text{MPa}$ $90$ $\text{MPa}$ $120$ $\text{MPa}$ $75$ $\text{MPa}$
A structural member under loading has a uniform state of plane stress which is usual notations is given by $\sigma _{x} = 3P, \sigma _{y} = -2P$ and $\tau_{xy} = \sqrt{2}...
Arjun
28.5k
points
Arjun
asked
Feb 15, 2022
Others
gateme-2022-set2
+
–
1
answers
0
votes
GATE Mechanical 2021 Set 2 | Question: 2
If the Laplace transform of a function $f(t)$ is given by $\frac{s+3}{\left ( s+1 \right )\left ( s+2 \right )}$, then $f(0)$ is $0$ $\frac{1}{2}$ $1$ $\frac{3}{2}$
If the Laplace transform of a function $f(t)$ is given by $\frac{s+3}{\left ( s+1 \right )\left ( s+2 \right )}$, then $f(0)$ is$0$$\frac{1}{2}$$1$$\frac{3}{2}$
go_editor
5.0k
points
go_editor
asked
Mar 1, 2021
Differential Equations
gateme-2021-set2
differential-equations
laplace-transforms
+
–
1
answers
1
votes
GATE2017 ME-2: 50
A rod of length $20$ mm is stretched to make a rod of length $40$ mm. Subsequently, it is compressed to make a rod of final length $10$ mm. Consider the longitudinal tensile strain as positive and compressive strain as negative. The total true longitudinal strain in the rod is $-0.5$ $-0.69$ $-0.75$ $-1.0$
A rod of length $20$ mm is stretched to make a rod of length $40$ mm. Subsequently, it is compressed to make a rod of final length $10$ mm. Consider the longitudinal tens...
Arjun
28.5k
points
Arjun
asked
Feb 26, 2017
Mechanics of Materials
gateme-2017-set2
mechanics-of-materials
applied-mechanics-and-design
+
–
0
answers
0
votes
GATE2020-ME-2: 9
The process, that uses a tapered horn to amplify and focus the mechanical energy for machining of glass, is electrochemical machining electrical discharge machining ultrasonic machining abrasive jet machining
The process, that uses a tapered horn to amplify and focus the mechanical energy for machining of glass, iselectrochemical machiningelectrical discharge machiningultrason...
go_editor
5.0k
points
go_editor
asked
Sep 18, 2020
Mechanics of Materials
gateme-2020-set2
energy-methods
mechanics-of-materials
applied-mechanics-and-design
+
–
0
answers
0
votes
GATE Mechanical 2023 | Question: 44
A coordinate measuring machine (CMM) is used to determine the distance between Surface $\text{SP}$ and Surface $\text{SQ}$ of an approximately cuboidal shaped part. Surface $\text{SP}$ is declared as the datum as per the engineering ... to fit the necessary planes. The distance between the two fitted planes is ____________ $\mathrm{mm}$. (Answer in integer)
A coordinate measuring machine (CMM) is used to determine the distance between Surface $\text{SP}$ and Surface $\text{SQ}$ of an approximately cuboidal shaped part. Surfa...
admin
4.4k
points
admin
asked
May 21, 2023
Others
gateme-2023
+
–
0
answers
0
votes
GATE Mechanical 2021 Set 1 | Question: 52
The Whitworth quick return mechanism is shown in the figure with link lengths as follows: $\text{OP = 300 mm, OA = 150 mm, AR = 160 mm, RS = 450 mm}$. The quick return ratio for the mechanism is ____________________ ($\textit{round off to one decimal place}$).
The Whitworth quick return mechanism is shown in the figure with link lengths as follows: $\text{OP = 300 mm, OA = 150 mm, AR = 160 mm, RS = 450 mm}$.The quick return rat...
gatecse
1.6k
points
gatecse
asked
Feb 22, 2021
Others
gateme-2021-set1
numerical-answers
+
–
0
answers
0
votes
GATE Mechanical 2019 Set 1 | GA Question: 8
Congo was named by Europeans, Congo's dictator Mobuto later changed the name of the county and the river to Zaire with the objective of Africanising names of persons and spaces. However, the name Zaire was a Portuguese alteration of ... was prevented by the Portuguese As a dictator Mobuto ordered the Portuguese to alter the name of the river to Zaire
Congo was named by Europeans, Congo’s dictator Mobuto later changed the name of the county and the river to Zaire with the objective of Africanising names of persons an...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Verbal Aptitude
gateme-2019-set1
verbal-ability
verbal-reasoning
passage-reading
+
–
0
answers
0
votes
GATE2015-2-31
A cantilever beam OP is connected to another beam PQ with a pin joint as shown in the figure. A load of $10$ $kN$ is applied at the mid-point of PQ. The magnitude of bending moment (in $kN$-$m$) at fixed end O is $2.5$ $5$ $10$ $25$
A cantilever beam OP is connected to another beam PQ with a pin joint as shown in the figure. A load of $10$ $kN$ is applied at the mid-point of PQ. The magnitude of bend...
Arjun
28.5k
points
Arjun
asked
Feb 24, 2017
Mechanics of Materials
gateme-2015-set2
deflection-of-beams
mechanics-of-materials
applied-mechanics-and-design
+
–
Page:
« prev
1
...
3
4
5
6
7
8
9
...
45
next »
GO Mechanical
Email or Username
Show
Hide
Password
I forgot my password
Remember
Log in
Register