Questions without an upvoted answer in Computer Integrated Manufacturing

Which one of the following options is NOT an error associated with STereoLithography (STL) file in additive manufacturing?Staircase effectMissing facetNon-manifold topolo...

Consider the Euler variables of polyhedral objects namely, $\text{P1, P2, P3,}$ and $\text{P4}$ as given in the table below.\[\begin{array}{|c|c|c|c|c|c|c|}\hline\text{Po...

​​​The preparatory functions in Computer Numerical Controlled $\text{(CNC)}$ machine programing are denoted by the alphabet$\mathrm{G}$$\mathrm{M}$$\mathrm{P}$$\mathrm{O}...

Which of the following additive manufacturing technique(s) can use a wire as a feedstock material?StereolithographyFused deposition modelingSelective laser sinteringDirec...

In a $\text{CNC}$ machine tool, the function of an interpolator is to generatesignal for the lubrication pump during machiningerror signal for tool radius compensation du...

A point $‘P’$ on a CNC controlled $XY$-stage is moved to another point $‘Q’$ using the coordinate system shown in the figure below and rapid positioning command $(G00)$A ...

Metal removal in electric discharge machining takes place throughion displacementmelting and vaporizationcorrosive and reactionplastic shear

An electrochemical machining (ECM) is to be used to cut a through hole into a $12$ mm thick aluminum plate. The hole has a rectangular cross-section. $10 \: mm \times 30 ...

A steel bar $200$ $mm$ in diameter is turned at a feed of $0.25$ $mm$/$rev$ with a depth of cut of $4$ $mm$. The rotational speed of the workpiece is $160$ $rpm$. The mat...