GATE ME 2013 | Question: 15

piyag476 asked Feb 19, 2017 • retagged May 1, 2020 by soujanyareddy13

See all

Please log in or register to answer this question.

Related questions

0 answers

0 votes

piyag476 asked Feb 19, 2017

GATE ME 2013 | Question: 35
In a $CAD$ package, mirror image of a $2D$ point $P(5,10)$ is to be obtained about a line which passes through the origin and makes an angle of $45^{\circ}$ counterclockwise with the $X$-axis. The coordinates of the transformed point will be $(7.5, 5)$ $(10, 5)$ $(7.5, -5)$ $(10, -5)$

In a $CAD$ package, mirror image of a $2D$ point $P(5,10)$ is to be obtained about a line which passes through the origin and makes an angle of $45^{\circ}$ counterclockw...

piyag476

1.4k points

piyag476 asked Feb 19, 2017

0 answers

0 votes

piyag476 asked Feb 19, 2017

GATE ME 2013 | Question: 53
In orthogonal turning of a bar of $100$ $mm$ diameter with a feed of $0.25$ $mm$/$rev$, depth of cut of $4$ $mm$ and cutting velocity of $90$ $m$/$min$, it is observed that the main (tangential) cutting force is perpendicular to the friction force ... ) cutting force is $1500$ $N$. The normal force acting at the chip-tool interface in $N$ is $1000$ $1500$ $2000$ $2500$

In orthogonal turning of a bar of $100$ $mm$ diameter with a feed of $0.25$ $mm$/$rev$, depth of cut of $4$ $mm$ and cutting velocity of $90$ $m$/$min$, it is observed th...

piyag476

1.4k points

piyag476 asked Feb 19, 2017

0 answers

0 votes

piyag476 asked Feb 19, 2017

GATE ME 2013 | Question: 52
In orthogonal turning of a bar of $100$ $mm$ diameter with a feed of $0.25$ $mm$/$rev$, depth of cut of $4$ $mm$ and cutting velocity of $90$ $m$/$min$, it is observed that the main (tangential) cutting force is perpendicular to the friction ... tangential) cutting force is $1500$ $N$. The orthogonal rake angle of the cutting tool in degree is zero $3.58$ $5$ $7.16$

In orthogonal turning of a bar of $100$ $mm$ diameter with a feed of $0.25$ $mm$/$rev$, depth of cut of $4$ $mm$ and cutting velocity of $90$ $m$/$min$, it is observed th...

piyag476

1.4k points

piyag476 asked Feb 19, 2017

0 answers

0 votes

piyag476 asked Feb 19, 2017

GATE ME 2013 | Question: 38
During the electrochemical machining $(ECM)$ of iron (atomic weight $= 56$, valency $= 2$) at current of $1000$ $A$ with $90\%$ current efficiency, the material removal rate was observed to be $0.26 gm/s$. If Titanium (atomic weight $= 48$, valency $= 3$) ... with $90\%$ current efficiency, the expected material removal rate in $gm/s$ will be $0.11$ $0.23$ $0.30$ $0.52$

During the electrochemical machining $(ECM)$ of iron (atomic weight $= 56$, valency $= 2$) at current of $1000$ $A$ with $90\%$ current efficiency, the material removal r...

piyag476

1.4k points

piyag476 asked Feb 19, 2017

0 answers

0 votes

piyag476 asked Feb 19, 2017

GATE ME 2013 | Question: 34
Two cutting tools are being compared for a machining operation. The tool life equations are: $\begin{array}{ll} \text{Carbide tool:} & VT^{1.6} = 3000 \\ \text{HSS tool:} & VT^{0.6} = 200 \end{array}$ where $V$ is the cutting speed in $m/min$ ... $m/min$ exceeds $15.0$ $39.4$ $49.3$ $60.0$

Two cutting tools are being compared for a machining operation. The tool life equations are:$\begin{array}{ll} \text{Carbide tool:} & VT^{1.6} = 3000 \\ \text{HSS tool:} ...

piyag476

1.4k points

piyag476 asked Feb 19, 2017

0 reply

Please log in or register to answer this question.

0 Answers

Related questions

0