GO Mechanical
Login
Register
Dark Mode
Brightness
Profile
Edit Profile
Messages
My favorites
My Updates
Logout
Recent questions tagged materials-manufacturing-and-industrial-engineering
0
answers
0
votes
GATE2020-ME-2: 45
Bars of $250$ mm length and $25$ mm diameter are to be turned on a lathe with a feed of $0.2$ mm/rev. Each regrinding of the tool costs Rs. $20$. The time required for each tool change is $1$ ... tool life $T$ is in min). The optimum tool cost per piece for maximum production rate is Rs. _______ (round off to $2$ decimal places).
Bars of $250$ mm length and $25$ mm diameter are to be turned on a lathe with a feed of $0.2$ mm/rev. Each regrinding of the tool costs Rs. $20$. The time required for ea...
go_editor
5.0k
points
go_editor
asked
Sep 18, 2020
Materials, Manufacturing and Industrial Engineering
gateme-2020-set2
numerical-answers
tool-life-and-wear
machining-and-machine-tool-operations
materials-manufacturing-and-industrial-engineering
+
–
0
answers
0
votes
GATE2020-ME-2: 47
For a single item inventory system, the demand is continuous, which is $10000$ per year. The replenishment is instantaneous and backorders ($S$ units) per cycle are allowed as shown in the figure. As soon as the quantity ($Q$ units) ordered ... . Based on the total cost minimization criteria, the maximum inventory reached in the system is ________ (round off to nearest integer).
For a single item inventory system, the demand is continuous, which is $10000$ per year. The replenishment is instantaneous and backorders ($S$ units) per cycle are allow...
go_editor
5.0k
points
go_editor
asked
Sep 18, 2020
Inventory Control
gateme-2020-set2
numerical-answers
inventory-control
materials-manufacturing-and-industrial-engineering
+
–
0
answers
0
votes
GATE2020-ME-1: 12
The base of a brass bracket needs rough grinding. For this purpose, the most suitable grinding wheel grade specification is $C30Q12V$ $A50G8V$ $C90J4B$ $A30D12V$
The base of a brass bracket needs rough grinding. For this purpose, the most suitable grinding wheel grade specification is$C30Q12V$$A50G8V$$C90J4B$$A30D12V$
go_editor
5.0k
points
go_editor
asked
Feb 19, 2020
Materials, Manufacturing and Industrial Engineering
gateme-2020-set1
materials-manufacturing-and-industrial-engineering
machining-and-machine-tools-operations
+
–
0
answers
0
votes
GATE2020-ME-1: 13
In the Critical Path Method $(CPM)$, the cost-time slope of an activity is given by $\dfrac{\text{Crash Cost – Normal Cost}}{\text{Crash Time}} \\$ $\dfrac{\text{Normal Cost}}{\text{Crash Time – Normal Time}} \\$ $\dfrac{\text{Crash Cost}}{\text{Crash Time – Normal Time}} \\ $ $\dfrac{\text{Crash Cost – Normal Cost}}{\text{Normal Time – Crash Time}}$
In the Critical Path Method $(CPM)$, the cost-time slope of an activity is given by$\dfrac{\text{Crash Cost – Normal Cost}}{\text{Crash Time}} \\$$\dfrac{\text{Normal C...
go_editor
5.0k
points
go_editor
asked
Feb 19, 2020
Operations Research
gateme-2020-set1
cpm
operations-research
materials-manufacturing-and-industrial-engineering
+
–
0
answers
0
votes
GATE2020-ME-1: 22
A sheet metal with a stock hardness of $250\: HRC$ has to be sheared using a punch and a die having a clearance of $\text{1 mm}$ between them. If the stock hardness of the sheet metal increases to $400\: HRC$, the clearance between the punch and the die should be _________ $mm.$
A sheet metal with a stock hardness of $250\: HRC$ has to be sheared using a punch and a die having a clearance of $\text{1 mm}$ between them. If the stock hardness of th...
go_editor
5.0k
points
go_editor
asked
Feb 19, 2020
Materials, Manufacturing and Industrial Engineering
gateme-2020-set1
numerical-answers
materials-manufacturing-and-industrial-engineering
casting-forming-and-joining-process
+
–
1
answers
0
votes
GATE2020-ME-1: 23
A company is hiring to fill four managerial vacancies. The candidates are five men and three women. If every candidate is equally likely to be chosen then the probability that at least one woman will be selected is _______(round off to $2$ decimal places).
A company is hiring to fill four managerial vacancies. The candidates are five men and three women. If every candidate is equally likely to be chosen then the probability...
go_editor
5.0k
points
go_editor
asked
Feb 19, 2020
Materials, Manufacturing and Industrial Engineering
gateme-2020-set1
numerical-answers
materials-manufacturing-and-industrial-engineering
operations-research
+
–
0
answers
0
votes
GATE2020-ME-1: 32
A strip of thickness $40\:mm$ is to be rolled to a thickness of $20\:mm$ using a two-high mill having rolls of diameter $200\:mm$. Coefficient of friction and arc length in $mm$, respectively are $0.45\:\text{and}\:38.84$ $0.39\:\text{and}\:38.84$ $0.39\:\text{and}\:44.72$ $0.45\:\text{and}\:44.72$
A strip of thickness $40\:mm$ is to be rolled to a thickness of $20\:mm$ using a two-high mill having rolls of diameter $200\:mm$. Coefficient of friction and arc length ...
go_editor
5.0k
points
go_editor
asked
Feb 19, 2020
Materials, Manufacturing and Industrial Engineering
gateme-2020-set1
materials-manufacturing-and-industrial-engineering
casting-forming-and-joining-process
+
–
0
answers
0
votes
GATE2020-ME-1: 33
For an assembly line, the production rate was $4$ pieces per hour and the average processing time was $60$ minutes. The $\text{WIP}$ inventory was calculated. Now, the production rate is kept the same, and the average processing time is brought down by $30$ percent. As ... , the $\text{WIP}$ inventory decreases by $25\%$ increases by $25\%$ decreases by $30\%$ increases by $30\%$
For an assembly line, the production rate was $4$ pieces per hour and the average processing time was $60$ minutes. The $\text{WIP}$ inventory was calculated. Now, the pr...
go_editor
5.0k
points
go_editor
asked
Feb 19, 2020
Materials, Manufacturing and Industrial Engineering
gateme-2020-set1
materials-manufacturing-and-industrial-engineering
operations-research
+
–
0
answers
0
votes
GATE2020-ME-1: 42
A slot of $25\:mm\times 25\:mm$ is to be milled in a workpiece of $300\: mm$ length using a side and face milling cutter of diameter $100\: mm$, width $25\: mm$ and having $20$ teeth.For a depth of cut $5\: mm$ ... and approach and over travel distance of $5\: mm$ each, the time required for milling the slot is ________ minutes (round off to one decimal place).
A slot of $25\:mm\times 25\:mm$ is to be milled in a workpiece of $300\: mm$ length using a side and face milling cutter of diameter $100\: mm$, width $25\: mm$ and havin...
go_editor
5.0k
points
go_editor
asked
Feb 19, 2020
Materials, Manufacturing and Industrial Engineering
gateme-2020-set1
numerical-answers
materials-manufacturing-and-industrial-engineering
machining-and-machine-tools-operation
+
–
0
answers
0
votes
GATE2020-ME-1: 43
The following data applies to basic shaft system: tolerance for hole$ = 0.002\: mm$, tolerance for shaft$ = 0.001\: mm$, allowance $= 0.003\: mm$, basic size $= 50\: mm$. The maximum hole size is _______ $mm$ (round off to $3$ decimal places).
The following data applies to basic shaft system:tolerance for hole$ = 0.002\: mm$,tolerance for shaft$ = 0.001\: mm$,allowance $= 0.003\: mm$,basic size $= 50\: mm$.The ...
go_editor
5.0k
points
go_editor
asked
Feb 19, 2020
Materials, Manufacturing and Industrial Engineering
gateme-2020-set1
numerical-answers
materials-manufacturing-and-industrial-engineering
metrology-and-inspection
fits-and-tolerance
+
–
0
answers
0
votes
GATE2020-ME-1: 44
A steel part with surface area of $125\:cm^{2}$ is to be chrome coated through an electroplating process using chromium acid sulphate as an electrolyte. An increasing current is applied to the part according to the following current time relation: $I=12+0.2t$ ... $\mu m$ (round off to one decimal place).
A steel part with surface area of $125\:cm^{2}$ is to be chrome coated through an electroplating process using chromium acid sulphate as an electrolyte. An increasing cur...
go_editor
5.0k
points
go_editor
asked
Feb 19, 2020
Materials, Manufacturing and Industrial Engineering
gateme-2020-set1
numerical-answers
materials-manufacturing-and-industrial-engineering
+
–
0
answers
0
votes
GATE2020-ME-1: 45
In a turning process using orthogonal tool geometry, a chip length of $100\: mm$ is obtained for an uncut chip length of $250\: mm$. The cutting conditions are: cutting speed $= 30\: m/min$, rake angle $ = 20^{\circ}$. The shear plane angle is _______ degrees (round off to one decimal place).
In a turning process using orthogonal tool geometry, a chip length of $100\: mm$ is obtained for an uncut chip length of $250\: mm$. The cutting conditions are: cutting s...
go_editor
5.0k
points
go_editor
asked
Feb 19, 2020
Materials, Manufacturing and Industrial Engineering
gateme-2020-set1
numerical-answers
materials-manufacturing-and-industrial-engineering
machining-and-machine-tool-operation
+
–
0
answers
0
votes
GATE2020-ME-1: 46
The thickness of a steel plate with material strength coefficient of $210\: MPa$, has to be reduced from $20\: mm$ to $15\: mm$ in a single pass in a two-high rolling mill with a roll radius of $450\: mm$ and rolling velocity of $28\: m/min$. If the ... ). Note: $\text{Average Flow Stress = Material Strength Coefficient}\times \dfrac{\left (\text{True Strain} \right )^{n}}{(1+n)}$
The thickness of a steel plate with material strength coefficient of $210\: MPa$, has to be reduced from $20\: mm$ to $15\: mm$ in a single pass in a two-high rolling mil...
go_editor
5.0k
points
go_editor
asked
Feb 19, 2020
Materials, Manufacturing and Industrial Engineering
gateme-2020-set1
numerical-answers
materials-manufacturing-and-industrial-engineering
machining-and-machine-tool-operation
+
–
0
answers
0
votes
GATE2020-ME-1: 47
Two business owners Shveta and Ashok run their business in two different states. Each of them, independent of the other, produces two products $A$ and $B$, sells them at $Rs.\:2,000$ per kg and $Rs.\:3,000$ per kg, respectively, and uses ... value of the difference in daily (optimal) revenue of Shveta and Ashok is _________ thousand Rupees (round off to $2$ decimal places).
Two business owners Shveta and Ashok run their business in two different states. Each of them, independent of the other, produces two products $A$ and $B$, sells them at ...
go_editor
5.0k
points
go_editor
asked
Feb 19, 2020
Materials, Manufacturing and Industrial Engineering
gateme-2020-set1
numerical-answers
materials-manufacturing-and-industrial-engineering
operations-research
+
–
0
answers
0
votes
GATE2020-ME-1: 48
$\textbf{Consider two cases as below.}$ $\textbf{Case 1:}$ A company buys $1000$ pieces per year of a certain part from vendor $'X'.$ The changeover time is $2$ hours and the price is $Rs.\: 10$ per piece. The holding cost rate per part is $10\%$ ... reduction in the annual cost of $\text{Case 2}$, as compared to $\text{Case 1}$ is __________ (round off to $2$ decimal places).
$\textbf{Consider two cases as below.}$$\textbf{Case 1:}$ A company buys $1000$ pieces per year of a certain part from vendor $’X’.$The changeover time is $2$ hours a...
go_editor
5.0k
points
go_editor
asked
Feb 19, 2020
Materials, Manufacturing and Industrial Engineering
gateme-2020-set1
numerical-answers
materials-manufacturing-and-industrial-engineering
operations-research
+
–
0
answers
0
votes
GATE2019 ME-2: 15
The fluidity of molten metal of cast alloys (without any addition of fluxes) increases with increase in viscosity surface tension freezing range degree of superheat
The fluidity of molten metal of cast alloys (without any addition of fluxes) increases with increase inviscositysurface tensionfreezing rangedegree of superheat
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set2
materials-manufacturing-and-industrial-engineering
casting-forming-and-joining-process
different-types-of-casting
+
–
0
answers
0
votes
GATE2019 ME-2: 16
The cold forming process in which a hardened tool is pressed against a workpiece (when there is relative motion between the tool and the workpiece) to produce a roughened surface with a regular pattern is Roll forming Strip forming Knurling Chamfering
The cold forming process in which a hardened tool is pressed against a workpiece (when there is relative motion between the tool and the workpiece) to produce a roughened...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set2
materials-manufacturing-and-industrial-engineering
casting-forming-and-joining-process
+
–
0
answers
0
votes
GATE2019 ME-2: 17
The most common limit gage used for inspecting the hole diameter is Snap gage Ring gage Plus gage Madter gage
The most common limit gage used for inspecting the hole diameter isSnap gageRing gagePlus gageMadter gage
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set2
materials-manufacturing-and-industrial-engineering
metrology-and-inspection
+
–
0
answers
0
votes
GATE2019 ME-2: 25
In an electrical discharge machining process, the breakdown voltage across inter electrode gap (IEG) is $200$ V and the capacitance of the RC circuit is $50 \mu F$. The energy (in $J$) released per spark across the IEG is _________
In an electrical discharge machining process, the breakdown voltage across inter electrode gap (IEG) is $200$ V and the capacitance of the RC circuit is $50 \mu F$. The e...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set2
numerical-answers
materials-manufacturing-and-industrial-engineering
machining-and-machine-tools-operations
+
–
0
answers
0
votes
GATE2019 ME-2: 34
The binary phase diagram of metals $P$ and $Q$ is shown in the figure. An alloy $X$ containing $60 \% P$ and $40 \% Q$ (by weight) is cooled from liquid to solid state. The fractions of solid and liquid (in weight percent) at $1250^o C$, respectively, will be $77.8 \% \text{ and } 22.2 \%$ $22.2 \% \text{ and } 77.8 \%$ $68.0 \% \text{ and } 38.0 \%$ $32.0 \% \text{ and } 68.0 \%$
The binary phase diagram of metals $P$ and $Q$ is shown in the figure. An alloy $X$ containing $60 \% P$ and $40 \% Q$ (by weight) is cooled from liquid to solid state. T...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set2
materials-manufacturing-and-industrial-engineering
+
–
0
answers
0
votes
GATE2019 ME-2: 35
The activities of a project, their duration and the precedence relationships are given in the table. For example, in a precedence relationship $ X<Y,Z $ means that $X$ is predecessor of activities $Y$ and $Z$ ... $17$ $21$ $23$ $25$
The activities of a project, their duration and the precedence relationships are given in the table. For example, in a precedence relationship $”X<Y,Z”$ means that $X...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set2
materials-manufacturing-and-industrial-engineering
operations-research
+
–
0
answers
0
votes
GATE2019 ME-2: 50
The figure shows a pouring arrangement for casting of a metal block. Frictional losses are negligible. The acceleration due to gravity is $9.81 \: m/s^2$ .The time (in $s$, round off to two decimal places) to fill up the mold cavity (of size $40 \: cm \times 30 \: cm \times 15 \: cm$) is _____
The figure shows a pouring arrangement for casting of a metal block. Frictional losses are negligible. The acceleration due to gravity is $9.81 \: m/s^2$ .The time (in $s...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set2
numerical-answers
materials-manufacturing-and-industrial-engineering
casting-forming-and-joining-process
+
–
0
answers
0
votes
GATE2019 ME-2: 51
A gas tungsten arc welding operation is performed using a current of $250 \: A$ and an arc voltage of $20 \: V$ at a welding speed of $5 \: mm/s$. Assuming that the arc efficiency is $70 \%$, the net heat input per unit length of the weld will be _________$kJ/mm$ (round off to one decimal place)
A gas tungsten arc welding operation is performed using a current of $250 \: A$ and an arc voltage of $20 \: V$ at a welding speed of $5 \: mm/s$. Assuming that the arc e...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set2
numerical-answers
materials-manufacturing-and-industrial-engineering
casting-forming-and-joining-process
principles-of-welding
+
–
0
answers
0
votes
GATE2019 ME-2: 52
The thickness of a sheet is reduced by rolling (without any change in width) using $600 \: mm$ diameter rolls. Neglect elastic deflection of the rolls and assume that the coefficient of friction at the roll-workpiece interface is $0.05$. The sheet enters ... final thickness that can be produced by this process in a single pass is __________ $mm$ (round off to two decimal places).
The thickness of a sheet is reduced by rolling (without any change in width) using $600 \: mm$ diameter rolls. Neglect elastic deflection of the rolls and assume that the...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set2
numerical-answers
materials-manufacturing-and-industrial-engineering
casting-forming-and-joining-process
+
–
0
answers
0
votes
GATE2019 ME-2: 53
A through hole is drilled in an aluminium alloy plate of $15 \: mm$ thickness with a drill bit of diameter $10$ mm, at a feed of $0.25$ mm/rev and a spindle speed of $1200$ rpm. If the specific energy required for cutting this material is $0.7 \: N \cdot m/mm^3$, the power required for drilling is ____________$W$ (round off to two decimal places)
A through hole is drilled in an aluminium alloy plate of $15 \: mm$ thickness with a drill bit of diameter $10$ mm, at a feed of $0.25$ mm/rev and a spindle speed of $120...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set2
numerical-answers
materials-manufacturing-and-industrial-engineering
machining-and-machine-tools-operations
+
–
0
answers
0
votes
GATE2019 ME-1: 13
In a casting process, a vertical channel through which molten metal flows downward from pouring basin to runner for reaching the mold cavity is called blister sprue riser pin hole
In a casting process, a vertical channel through which molten metal flows downward from pouring basin to runner for reaching the mold cavity is calledblistersprueriserpin...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set1
materials-manufacturing-and-industrial-engineering
casting-forming-and-joining-process
+
–
0
answers
0
votes
GATE2019 ME-1: 14
Which one of the following welding methods provides the highest heat flux $(W/mm^2)$? Oxy-acetylene gas welding Tungsten inert gas welding Plasma arc welding Laser beam welding
Which one of the following welding methods provides the highest heat flux $(W/mm^2)$?Oxy-acetylene gas weldingTungsten inert gas weldingPlasma arc weldingLaser beam weldi...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set1
materials-manufacturing-and-industrial-engineering
casting-forming-and-joining-process
principles-of-welding
+
–
0
answers
0
votes
GATE2019 ME-1: 15
The length, width and thickness of a steel sample are $400$ mm, $40$ mm and $20$ mm, respectively. Its thickness needs to be uniformly reduced by $2$ mm in a single pass by using horizontal slab milling. The milling cutter (diameter: $100$ mm, width: $50$ mm) has $20$ ... task are $14$ mm, $18.4$ s $21$ mm, $28.9$ s $21$ mm, $39.4$ s $14$ mm, $21.4$ s
The length, width and thickness of a steel sample are $400$ mm, $40$ mm and $20$ mm, respectively. Its thickness needs to be uniformly reduced by $2$ mm in a single pass ...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set1
materials-manufacturing-and-industrial-engineering
machining-and-machine-tools-operation
+
–
0
answers
0
votes
GATE2019 ME-1: 15
The position vector $\overrightarrow{OP}$ of point $P(20,10)$ is rotated anti-clockwise in $X-Y$ plane by an angle $\theta = 30^{\circ}$ such that point $P$ occupies position $Q$, as shown in the figure. The coordinates $(x,y)$ of $Q$ are $(13.40,22.32)$ $(22.32, 8.26)$ $(12.32, 18.66)$ $(18.66, 12.32)$
The position vector $\overrightarrow{OP}$ of point $P(20,10)$ is rotated anti-clockwise in $X-Y$ plane by an angle $\theta = 30^{\circ}$ such that point $P$ occupies posi...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set1
materials-manufacturing-and-industrial-engineering
machining-and-machine-tools-operation
+
–
0
answers
0
votes
GATE2019 ME-1: 17
The table presents the demand of a product. By simple three-months moving average method, the demand-forecast of the product for the month of September is ... $490$ $510$ $530$ $536.67$
The table presents the demand of a product. By simple three-months moving average method, the demand-forecast of the product for the month of September is$$\begin{array}{...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set1
materials-manufacturing-and-industrial-engineering
operations-research
+
–
0
answers
0
votes
GATE2019 ME-1: 35
In orthogonal turning of a cylindrical tube of wall thickness $5 \: mm$, the axial and the tangential cutting forces were measured as $1259 \: N$ and $1601 \:N$, respectively. The measured chip thickness after machining was found to be $0.3 \: mm$. The rake angle was ... solution, the shear strength of the material is closest to $722 \: MPa$ $920 \: MPa$ $200 \: MPa$ $875 \: MPa$
In orthogonal turning of a cylindrical tube of wall thickness $5 \: mm$, the axial and the tangential cutting forces were measured as $1259 \: N$ and $1601 \:N$, respecti...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set1
materials-manufacturing-and-industrial-engineering
machining-and-machine-tools-operations
+
–
0
answers
0
votes
GATE2019 ME-1: 36
A circular shaft having diameter $65.00_{-0.05}^{+0.01} \: mm$ is manufactured by turning process. A $50 \: \mu m$ thick coating of TiN is deposited on the shaft. Allowed variation in TiN film thickness is $\pm 5 \mu m$. The minimum hole diameter (in mm) to just provide clearance fit is $65.01$ $65.12$ $64.95$ $65.10$
A circular shaft having diameter $65.00_{-0.05}^{+0.01} \: mm$ is manufactured by turning process. A $50 \: \mu m$ thick coating of TiN is deposited on the shaft. Allowed...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set1
materials-manufacturing-and-industrial-engineering
machining-and-machine-tools-operations
+
–
0
answers
0
votes
GATE2019 ME-1: 37
Match the following sand mold casting defects with their respective causes. ... $P-3, Q-4, R-2, S-1$ $P-2, Q-4, R-1, S-3$ $P-3, Q-4, R-1, S-2$
Match the following sand mold casting defects with their respective causes.$\begin{array}{|l|l|l|l|} \hline \\ {} & \text{Defect} & {} & \text{Cause} \\ \hline P & \text{...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set1
materials-manufacturing-and-industrial-engineering
casting-forming-and-joining-process
+
–
0
answers
0
votes
GATE2019 ME-1: 52
In ASA system, the side cutting and end cutting edge angles of a sharp turning tool are $45^{\circ}$ and $10^{\circ}$, respectively. The feed during cylindrical turning is $0.1 \: mm/rev$. The center line average surface roughness (in $\mu m$, round off to one decimal place) of the generated surface is __________
In ASA system, the side cutting and end cutting edge angles of a sharp turning tool are $45^{\circ}$ and $10^{\circ}$, respectively. The feed during cylindrical turning i...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set1
numerical-answers
materials-manufacturing-and-industrial-engineering
machining-and-machine-tools-operations
+
–
0
answers
0
votes
GATE2019 ME-1: 53
Taylor’s tool life equation is given by $VT^n=C$, where $V$ is in $m/min$ and $T$ is in $min$. In a turning operation, two tools $X$ and $Y$ are used. For tool $X$, $n=0.3$ and $C=60$ and for tool $Y$, $n=0.6$ and $C=90$. Both the tools will have the same tool life for the cutting speed (in $m/min$, round off to one decimal place) of ____________
Taylor’s tool life equation is given by $VT^n=C$, where $V$ is in $m/min$ and $T$ is in $min$. In a turning operation, two tools $X$ and $Y$ are used. For tool $X$, $n=...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set1
numerical-answers
materials-manufacturing-and-industrial-engineering
machining-and-machine-tools-operations
tool-life-and-wear
+
–
0
answers
0
votes
GATE2019 ME-1: 54
Five jobs $(J1, J2, J3, J4$ and $J5)$ need to be processes in a factory. Each job can be assigned to any of the five different machines $(M1, M2, M3, M4$ and $M5)$. The time durations taken (in minutes) by the machines for each of the jobs, are given in the table. ...
Five jobs $(J1, J2, J3, J4$ and $J5)$ need to be processes in a factory. Each job can be assigned to any of the five different machines $(M1, M2, M3, M4$ and $M5)$. The t...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set1
numerical-answers
materials-manufacturing-and-industrial-engineering
production-planning-and-control
+
–
0
answers
0
votes
GATE2019 ME-1: 55
A project consists of six activities. The immediate predecessor of each activity and the estimated duration is also provided in the table below: ... amount of time, the maximum duration (in weeks) of the activity $S$ without delaying the completion of the project is ________
A project consists of six activities. The immediate predecessor of each activity and the estimated duration is also provided in the table below:$\begin{array}{|c|c|c|} \h...
Arjun
28.5k
points
Arjun
asked
Feb 9, 2019
Materials, Manufacturing and Industrial Engineering
gateme-2019-set1
numerical-answers
materials-manufacturing-and-industrial-engineering
production-planning-and-control
+
–
0
answers
0
votes
GATE ME 2012 | Question: 39
In a DC arc welding operation, the voltage-arc length characteristic was obtained as $V_{arc} = 20+5l$ where the arc length $l$ was varied between $5$ mm and $7$ mm. Here $V_{arc}$ denotes the arc voltage in $Volts$. The arc current was varied from $400$ A and $500$ A. ... for the welding operation are $45$ V, $450$ A $75$ V, $750$ A $95$ V, $950$ A $150$ V, $1500$ A
In a DC arc welding operation, the voltage-arc length characteristic was obtained as $V_{arc} = 20+5l$ where the arc length $l$ was varied between $5$ mm and $7$ mm. Here...
Andrijana3306
1.5k
points
Andrijana3306
asked
Mar 19, 2018
Materials, Manufacturing and Industrial Engineering
gateme-2012
materials-manufacturing-and-industrial-engineering
casting-forming-and-joining-process
principles-of-welding
+
–
0
answers
0
votes
GATE ME 2012 | Question: 38
In a single pass rolling process using $410$ mm diameter steel rollers, a strip of width $140$ mm and thickness $8$ mm undergoes $10\%$ reduction of thickness. The angle of bite in radians is $0.006$ $0.031$ $0.062$ $0.600$
In a single pass rolling process using $410$ mm diameter steel rollers, a strip of width $140$ mm and thickness $8$ mm undergoes $10\%$ reduction of thickness. The angle ...
Andrijana3306
1.5k
points
Andrijana3306
asked
Mar 19, 2018
Materials, Manufacturing and Industrial Engineering
gateme-2012
materials-manufacturing-and-industrial-engineering
casting-forming-and-joining-process
rolling-process
+
–
0
answers
0
votes
GATE ME 2012 | Question: 28
In a single pass drilling operation, a through hole of $15$ mm diameter is to be drilled in a steel plate of $50$ mm thickness. Drill spindle speed is $500$ rpm, feed is $0.2$ mm/rev and drill point angle is $118^{\circ}$. Assuming $2$ mm clearance at approach and exit, the total drill time (in seconds) is $35.1$ $32.4$ $31.2$ $30.1$
In a single pass drilling operation, a through hole of $15$ mm diameter is to be drilled in a steel plate of $50$ mm thickness. Drill spindle speed is $500$ rpm, feed is ...
Andrijana3306
1.5k
points
Andrijana3306
asked
Mar 19, 2018
Materials, Manufacturing and Industrial Engineering
gateme-2012
materials-manufacturing-and-industrial-engineering
+
–
Page:
1
2
3
4
5
next »
GO Mechanical
Email or Username
Show
Hide
Password
I forgot my password
Remember
Log in
Register