GO Mechanical
Login
Register
Dark Mode
Brightness
Profile
Edit Profile
Messages
My favorites
My Updates
Logout
Filter
Recent
Hot!
Most votes
Most answers
Most views
Previous GATE
Featured
Recent questions in Fluid Mechanics and Thermal Sciences
0
answers
0
votes
GATE ME 2012 | Question: 5
Oil flows through a $200$ mm diameter horizontal cast iron pipe (friction factor, $f=0.0225$) of length $500 m$. The volumetric flow rate is $0.2 \: m^3/s$. The head loss (in m) due to friction is (assume $g=9.81 m/s^2$) $116.18$ $0.116$ $18.22$ $232.36$
Oil flows through a $200$ mm diameter horizontal cast iron pipe (friction factor, $f=0.0225$) of length $500 m$. The volumetric flow rate is $0.2 \: m^3/s$. The head loss...
Andrijana3306
1.5k
points
Andrijana3306
asked
Mar 19, 2018
Fluid Mechanics
gateme-2012
fluid-mechanics-and-thermal-science
fluid-mechanics
head-losses-in-pipes
+
–
0
answers
0
votes
GATE ME 2012 | Question: 4
During $\textit{normalizing} $ process of steel, the specimen is heated between the upper and lower critical temperature and cooled in still air above the upper critical temperature and cooled in furnace above the upper critical temperature and cooled in still air between the upper and lower critical temperature and cooled in furnace
During $\textit{normalizing} $ process of steel, the specimen is heatedbetween the upper and lower critical temperature and cooled in still airabove the upper critical te...
Andrijana3306
1.5k
points
Andrijana3306
asked
Mar 19, 2018
Heat Transfer
gateme-2012
fluid-mechanics-and-thermal-science
heat-transfer
+
–
0
answers
0
votes
GATE ME 2012 | Question: 1
In abrasive jet machining, as the distance between the nozzle tip and the work surface increases, the material removal rate increases continuously decreases continuously decreases, becomes stable and then increases increases, becomes stable and then decreases
In abrasive jet machining, as the distance between the nozzle tip and the work surface increases, the material removal rateincreases continuouslydecreases continuouslydec...
Andrijana3306
1.5k
points
Andrijana3306
asked
Mar 19, 2018
Fluid Mechanics
gateme-2012
fluid-mechanics-and-thermal-science
fluid-mechanics
+
–
0
answers
0
votes
ISRO2009-11
The transition Reynolds number for flow over a flat plate is $5\ast 10^5$. What is the distance from the leading edge at which transition will occur for flow of water with a uniform velocity of $1 \: \text{m/s}?\;($For water, the kinematic viscosity $v=0.86 \ast 10^{-6} \:\text{m}^2\text{/s})$ $0.43\;\text{m}$ $1\;\text{m}$ $43\;\text{m}$ $103\;\text{m}$
The transition Reynolds number for flow over a flat plate is $5\ast 10^5$. What is the distance from the leading edge at which transition will occur for flow of water wit...
m2n037
940
points
m2n037
asked
Mar 6, 2018
Fluid Mechanics
isro2009
+
–
0
answers
0
votes
ISRO2009-10
At the eye tip of a centrifugal impeller, blade velocity is $200 \: \text{m/s}$ while the uniform axial velocity at the inlet is $150 \: \text{m/s}$. If the sonic velocity is $300 \: \text{m/s}$, then the inlet Mach number of the flow will be $0.75$ $0.66$ $0.90$ $0.83$
At the eye tip of a centrifugal impeller, blade velocity is $200 \: \text{m/s}$ while the uniform axial velocity at the inlet is $150 \: \text{m/s}$. If the sonic velocit...
m2n037
940
points
m2n037
asked
Mar 6, 2018
Power Engineering
isro2009
+
–
0
answers
0
votes
ISRO2009-9
The radiative heat transfer rate per unit area $(W/m2)$ between two plane parallel grey surfaces (emissivity $0.9$) maintained at $400 \: \text{K}$ and $300 \: \text{K}$ is (Stefan Bottzman constant $\sigma=5.67 \times 10^{-6} \;W/m^2K^4)$ $1020$ $464$ $812$ $567$
The radiative heat transfer rate per unit area $(W/m2)$ between two plane parallel grey surfaces (emissivity $0.9$) maintained at $400 \: \text{K}$ and $300 \: \text{K}$ ...
m2n037
940
points
m2n037
asked
Mar 6, 2018
Heat Transfer
isro2009
+
–
0
answers
0
votes
ISRO2009-8
The pressure drop for a relatively low Reynolds number flow in a $600 \: \text{mm}, \: 30 \: \text{m}$ long pipeline is $70 \;\text{kPa}$. What is the wall shear stress? $0 \;\text{Pa}$ $1400 \;\text{Pa}$ $700 \;\text{Pa}$ $350 \;\text{Pa}$
The pressure drop for a relatively low Reynolds number flow in a $600 \: \text{mm}, \: 30 \: \text{m}$ long pipeline is $70 \;\text{kPa}$. What is the wall shear stress?$...
m2n037
940
points
m2n037
asked
Mar 6, 2018
Fluid Mechanics
isro2009
+
–
0
answers
0
votes
ISRO2009-7
A metallic cube of side $10 \;\text{cm}$, density $6.8 \: gm/cc$ is floating in liquid mercury (density $13.6 \: \text{gm/cc}$), with $5 \;\text{cm}$ height of cube exposed above the mercury level. Water (density $1 \: \text{gm/cc}$) is filled over this, to submerge the cube ... of cube exposed above mercury level is $4.6 \;\text{cm}$ $5.4 \;\text{cm}$ $5.0 \;\text{cm}$ $5.8 \;\text{cm}$
A metallic cube of side $10 \;\text{cm}$, density $6.8 \: gm/cc$ is floating in liquid mercury (density $13.6 \: \text{gm/cc}$), with $5 \;\text{cm}$ height of cube expos...
m2n037
940
points
m2n037
asked
Mar 6, 2018
Fluid Mechanics
isro2009
+
–
0
answers
0
votes
ISRO2009-6
A necessary precaution in selection of pumps for parallel operations is that $\text{H-Q}$ characteristics of both should be identical Both pumps should be centrifugal type Both pumps should be identical There should not be change from positive to negative slope in H-Q curve
A necessary precaution in selection of pumps for parallel operations is that$\text{H-Q}$ characteristics of both should be identicalBoth pumps should be centrifugal typeB...
m2n037
940
points
m2n037
asked
Mar 6, 2018
Power Engineering
isro2009
+
–
0
answers
0
votes
ISRO2009-5
Across a normal shock Static pressure and the static temperature rise entropy remains constant velocity and static pressure decrease density and temperature decrease
Across a normal shockStatic pressure and the static temperature riseentropy remains constantvelocity and static pressure decreasedensity and temperature decrease
m2n037
940
points
m2n037
asked
Mar 6, 2018
Fluid Mechanics
isro2009
+
–
0
answers
0
votes
ISRO2009-4
The relation ${p^{V}}^{\gamma}=$ constant, where $\gamma$ is the ratio of the specific heats of ideal gas, is applicable to Any adiabatic process Only reversible adiabatic process Only irreversible adiabatic process Only isothermal process
The relation ${p^{V}}^{\gamma}=$ constant, where $\gamma$ is the ratio of the specific heats of ideal gas, is applicable toAny adiabatic processOnly reversible adiabatic ...
m2n037
940
points
m2n037
asked
Mar 6, 2018
Heat Transfer
isro2009
+
–
0
answers
0
votes
ISRO2009-3
The correct sequence of the centrifugal pump components through which the fluid flows is Impeller, Suction pipe, Foot valve and strainer, Delivery pipe Foot valve and strainer, Suction pipe, Impeller, Delivery pipe Impeller, Suction pipe, Delivery pipe, Foot valve and strainer Suction pipe, Delivery pipe, Impeller, Foot valve and strainer
The correct sequence of the centrifugal pump components through which the fluid flows isImpeller, Suction pipe, Foot valve and strainer, Delivery pipeFoot valve and strai...
m2n037
940
points
m2n037
asked
Mar 6, 2018
Power Engineering
isro2009
+
–
0
answers
0
votes
ISRO2009-2
If the stream function is given by $\Psi=3xy$, then the velocity at a point $(2,3)$ will be $7.21 \: \text{unit}$ $18 \: \text{unit}$ $10.82 \: \text{unit}$ $54 \: \text{unit}$
If the stream function is given by $\Psi=3xy$, then the velocity at a point $(2,3)$ will be$7.21 \: \text{unit}$$18 \: \text{unit}$$10.82 \: \text{unit}$$54 \: \text{unit...
m2n037
940
points
m2n037
asked
Mar 6, 2018
Fluid Mechanics
isro2009
+
–
0
answers
0
votes
ISRO2009-1
A hydraulic press has a ram of $15 \: \text{cm}$ diameter and plunger of $1.5 \: \text{cm}$. It is required to lift a mass of $1000 \: \text{kg}$. The force required on plunger is nearly equal to $100\;\text{N}$ $1000\;\text{N}$ $10000\;\text{N}$ $10\;\text{N}$
A hydraulic press has a ram of $15 \: \text{cm}$ diameter and plunger of $1.5 \: \text{cm}$. It is required to lift a mass of $1000 \: \text{kg}$. The force required on p...
m2n037
940
points
m2n037
asked
Mar 6, 2018
Fluid Mechanics
isro2009
+
–
0
answers
0
votes
GATE2018-2-55
A vehicle powered by a spark ignition engine follows air standard Otto cycle ($\gamma =1.4$). The engine generates $70$ kW while consuming $10.3$ kg/hr of fuel. The calorific value of the fuel is $44,000 \: kJ/kg$. The compression ratio is _________ (correct to two decimal places.
A vehicle powered by a spark ignition engine follows air standard Otto cycle ($\gamma =1.4$). The engine generates $70$ kW while consuming $10.3$ kg/hr of fuel. The calor...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Applications
gateme-2018-set2
numerical-answers
+
–
0
answers
0
votes
GATE2018-2-54
Steam in the condenser of a thermal power plant is to be condensed at a temperature of $30^{\circ}C$ with cooling water which enters the tubes of the condenser at $14^{\circ}C$ and exists at $22^{\circ}C$ ... coefficient is $2000 \: W/m^2 \: K$. The heat transfer (in $MW$) to the condenser is _________ (correct to two decimal places).
Steam in the condenser of a thermal power plant is to be condensed at a temperature of $30^{\circ}C$ with cooling water which enters the tubes of the condenser at $14^{\c...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Heat Transfer
gateme-2018-set2
numerical-answers
+
–
0
answers
0
votes
GATE2018-2-45
A test is conducted on a one-fifth scale model of a Francis turbine under a head of $2 \: m$ and volumetric flow rate of $1 \: m^3/s$ at $450 \: rpm$. Take the water density and the acceleration due to gravity as $10^3 \: kg/m^3$ ... prototype turbines. The power (in MW) of a full sized turbine while working under a head of $30 \: m$ is _______ (correct to two decimal places)
A test is conducted on a one-fifth scale model of a Francis turbine under a head of $2 \: m$ and volumetric flow rate of $1 \: m^3/s$ at $450 \: rpm$. Take the water dens...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Applications
gateme-2018-set2
numerical-answers
+
–
0
answers
0
votes
GATE2018-2-44
Ambient air is at a pressure of $100 \: kPa$, dry bulb temperature at $30^{\circ} C$ and $60 \%$ relative humidity. The saturation pressure of water at $30^{\circ} C$ id $4.24 \: kPa$. The specific humidity of air (in $g/kg$ of dry air) is _______ (correct to two decimal places).
Ambient air is at a pressure of $100 \: kPa$, dry bulb temperature at $30^{\circ} C$ and $60 \%$ relative humidity. The saturation pressure of water at $30^{\circ} C$ id ...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Thermodynamics
gateme-2018-set2
numerical-answers
+
–
0
answers
0
votes
GATE2018-2-43
A standard vapor compression refrigeration cycle operating with a condensing temperature of $35^{\circ}C$ and an evaporating temperature of $-10^{\circ}C$ develops $15 \: kW$ of cooling. The $p-h$ diagram shows the enthalpies at various states. If the isentropic ... of the compressor is $0.75$, the magnitude of compressor power (in $kW$) is _________ (correct to two decimal places)
A standard vapor compression refrigeration cycle operating with a condensing temperature of $35^{\circ}C$ and an evaporating temperature of $-10^{\circ}C$ develops $15 \:...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Thermodynamics
gateme-2018-set2
numerical-answers
+
–
0
answers
0
votes
GATE2018-2-42
Air is held inside a non-insulated cylinder using a piston (mass $M=25 \: kg$ and area $A=100 \: cm^2$) and stoppers (of negligible area), as shown in the figure. The initial pressure $P_i$ and temperature $T_i$ ... of the air inside the cylinder ($^{\circ}C$) at which the piston will begin to move is ______ (correct to two decimal places).
Air is held inside a non-insulated cylinder using a piston (mass $M=25 \: kg$ and area $A=100 \: cm^2$) and stoppers (of negligible area), as shown in the figure. The ini...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Applications
gateme-2018-set2
numerical-answers
+
–
0
answers
0
votes
GATE2018-2-41
A $0.2 \:m$ thick infinite black plate having a thermal conductivity of $3.96 \: W/m-K$ is exposed to two infinite black surfaces at $300 \: K$ and $400 \: K$ as shown in the figure. At steady state, the surface temperature of the plate facing the ... $1-D$ heat conduction, the magnitude of the heat flux through the place (in $W/m^2$) is ___________ (correct to two decimal places)
A $0.2 \:m$ thick infinite black plate having a thermal conductivity of $3.96 \: W/m-K$ is exposed to two infinite black surfaces at $300 \: K$ and $400 \: K$ as shown in...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Heat Transfer
gateme-2018-set2
numerical-answers
+
–
0
answers
0
votes
GATE2018-2-40
A frictionless circular piston of area $10^{-2} \: m^2$ and mass $100 \: kg$ sinks into a cylindrical container of the same area filled with water of density $1000 \: kg/m^3$ ... water to be incompressible, the magnitude of the piston velocity (in $m/s$) at the instant shown is _____ (correct to three decimal places).
A frictionless circular piston of area $10^{-2} \: m^2$ and mass $100 \: kg$ sinks into a cylindrical container of the same area filled with water of density $1000 \: kg/...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Fluid Mechanics
gateme-2018-set2
numerical-answers
+
–
0
answers
0
votes
GATE2018-2-34
Air flows at the rate of $1.5 \: m^3/s$ through a horizontal pipe with a gradually reducing cross-section as shown in the figure. The two cross-sections of the pipe have diameters of the $400 \: mm$ and $200 \: mm$. Take the air density as $1.2 \: kg/m^3$ and assume inviscid ... change in pressure $(p_2-p_1)$ (in $kPa$) between sections $1$ and $2$ is $-1.28$ $2.56$ $- 2.13$ $1.28$
Air flows at the rate of $1.5 \: m^3/s$ through a horizontal pipe with a gradually reducing cross-section as shown in the figure. The two cross-sections of the pipe have ...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Fluid Mechanics
gateme-2018-set2
+
–
1
answers
0
votes
GATE2018-2-23
An engine operates on the reversible cycle as shown in the figure. The work output from the engine (in (kJ/cycle) is ____ (correct to two decimal places).
An engine operates on the reversible cycle as shown in the figure. The work output from the engine (in (kJ/cycle) is ____ (correct to two decimal places).
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Applications
gateme-2018-set2
numerical-answers
+
–
0
answers
0
votes
GATE2018-2-22
The viscous laminar flow of air over a flat plate results in the formation of a boundary layer. The boundary layer thickness at the end of the plate of length $L$ is $\delta_L$. When the plate length is increased to twice its original length, the ... laminar boundary layer thickness at the end of the plate (with respect to $\delta_L$ is _______ (correct to two decimal palces).
The viscous laminar flow of air over a flat plate results in the formation of a boundary layer. The boundary layer thickness at the end of the plate of length $L$ is $\de...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Fluid Mechanics
gateme-2018-set2
numerical-answers
+
–
0
answers
0
votes
GATE2018-2-11
Select the correct statement for $50\%$ reaction stage in a steam turbine. The rotor blade is symmetric The stator blade is symmetric The absolute inlet flow angle is equal to absolute exit flow angle The absolute exit flow angle is equal to inlet angle of rotor blade
Select the correct statement for $50\%$ reaction stage in a steam turbine.The rotor blade is symmetricThe stator blade is symmetricThe absolute inlet flow angle is equal ...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Applications
gateme-2018-set2
+
–
0
answers
0
votes
GATE2018-2-10
For an ideal gas with constant properties undergoing a quasi-static process, which one of the following represents the change of entropy $(\Delta s$) from state $1$ to $2$? $\Delta s = C_p \ln \bigg( \dfrac{T_2}{T_1} \bigg) - R \ln \bigg( \dfrac{P_2}{P_1} \bigg) \\$ ... $\Delta s = C_V \ln \bigg( \dfrac{T_2}{T_1} \bigg) + R \ln \bigg( \dfrac{V_1}{V_2} \bigg)$
For an ideal gas with constant properties undergoing a quasi-static process, which one of the following represents the change of entropy $(\Delta s$) from state $1$ to $2...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Thermodynamics
gateme-2018-set2
+
–
0
answers
0
votes
GATE2018-2-9
The peak wavelength of radiation emitted by a black body at a temperature of $2000 \: K$ is $1.45 \: \mu m$. If the peak wavelength of emitted radiation changes to $2.90 \: \mu m$, then the temperature (in $K$) of the black body is $500$ $1000$ $4000$ $8000$
The peak wavelength of radiation emitted by a black body at a temperature of $2000 \: K$ is $1.45 \: \mu m$. If the peak wavelength of emitted radiation changes to $2.90 ...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Heat Transfer
gateme-2018-set2
+
–
1
answers
0
votes
GATE2018-1-47
A plane slab of thickness $L$ and thermal conductivity $k$ is heated heated with a fluid on one side $(P)$, and the other side $(Q)$ is maintained at a constant temperature, $T_Q$ of $25^{\circ}C$ ... The steady state temperature, $T_P$ (in $^{\circ}$C) of the side which is exposed to the fluid is _____ (correct to two decimal places)
A plane slab of thickness $L$ and thermal conductivity $k$ is heated heated with a fluid on one side $(P)$, and the other side $(Q)$ is maintained at a constant temperatu...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Heat Transfer
gateme-2018-set1
numerical-answers
heat-transfer
fluid-mechanics-and-thermal-science
+
–
0
answers
0
votes
GATE2018-1-46
An engine working on air standard Otto cycle is supplied with air at $0.1 MPa$ and $35^{\circ} \: C$. The compression ratio is $8$. The heat supplied is $500 \: kJ/kg \: K$. The maximum temperature (in $K$) of the cycle is _______ (correct to one decimal place)
An engine working on air standard Otto cycle is supplied with air at $0.1 MPa$ and $35^{\circ} \: C$. The compression ratio is $8$. The heat supplied is $500 \: kJ/kg \: ...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Applications
gateme-2018-set1
numerical-answers
applications
fluid-mechanics-and-thermal-science
+
–
0
answers
0
votes
GATE2018-1-45
Steam flows through a nozzle at a mess flow rate of $m=0.1 \: kg/s$ with a heat loss of $5 \: kW$. The enthalpies at inlet and exit are $2500 \: kJ/kg$ and $2350 \: kJ/kg$, respectively. Assuming negligible velocity in inlet ($C_1 \approx 0$), the velocity ($C_2$) of steam (in $m/s$) at the nozzle exit is _____ (correct to two decimal places).
Steam flows through a nozzle at a mess flow rate of $m=0.1 \: kg/s$ with a heat loss of $5 \: kW$. The enthalpies at inlet and exit are $2500 \: kJ/kg$ and $2350 \: kJ/kg...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Applications
gateme-2018-set1
numerical-answers
applications
fluid-mechanics-and-thermal-science
+
–
0
answers
0
votes
GATE2018-1-43
A solid block of $2.0 \: kg$ mass slides steadily at a velocity $V$ along a vertical wall as shown in the figure below. A thin oil film of thickness $h=0.15 \: mm$ provides lubrication between the block and the wall. The surface area of the face of the block ... $V$ (in $m/s$) of the block is ______ (correct to one decimal place)
A solid block of $2.0 \: kg$ mass slides steadily at a velocity $V$ along a vertical wall as shown in the figure below. A thin oil film of thickness $h=0.15 \: mm$ provid...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Fluid Mechanics
gateme-2018-set1
numerical-answers
fluid-mechanics
fluid-mechanics-and-thermal-science
+
–
0
answers
0
votes
GATE2018-1-42
A sprinkler shown in the figure rotates about its hinge point in a horizontal plane due to water flow discharged through its two exit nozzles. The total flow rate Q through the sprinkler is $1$ litre/sec and the cross-sectional area of each exit nozzle ... hinge, the steady state angular speed of rotation (in rad/s) of the sprinkler is ______ (correct to two decimal places)
A sprinkler shown in the figure rotates about its hinge point in a horizontal plane due to water flow discharged through its two exit nozzles.The total flow rate Q throug...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Fluid Mechanics
gateme-2018-set1
numerical-answers
fluid-mechanics
fluid-mechanics-and-thermal-science
+
–
0
answers
0
votes
GATE2018-1-44
A tank of volume $0.05 \: m^3$ contains a mixture of saturated water and saturated steam at $200 ^{\circ}C$. The mass of the liquid present is $8 \: kg$. The entropy (in $kJ/kg \: K$) of the mixture is _______ (correct to two decimal places). Property data for saturated steam and water are: ... $s_{fg}=4.1014 \: kJ/kg \: K, \: s_f=2.3309 \: kJ/kg \: K$
A tank of volume $0.05 \: m^3$ contains a mixture of saturated water and saturated steam at $200 ^{\circ}C$. The mass of the liquid present is $8 \: kg$. The entropy (in...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Thermodynamics
gateme-2018-set1
numerical-answers
thermodynamics
+
–
0
answers
0
votes
GATE2018-1-34
In a Lagrangian system, the position of a fluid particle in a flow is described as $x=x_0e^{-kt}$ and $y=y_oe^{kt}$ where $t$ is the time while $x_o, \: y_o$, and $k$ are constants. The flow is unsteady and one-dimensional steady and two-dimensional steady and one-dimensional unsteady and two-dimensional
In a Lagrangian system, the position of a fluid particle in a flow is described as $x=x_0e^{-kt}$ and $y=y_oe^{kt}$ where $t$ is the time while $x_o, \: y_o$, and $k$ are...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Fluid Mechanics
gateme-2018-set1
fluid-mechanics
fluid-mechanics-and-thermal-science
+
–
0
answers
0
votes
GATE2018-1-33
A tank open at the top with a water level of $1$ m, as shown in the figure, has a hole at a height of 0.5 m. A free jet leaves horizontally from the smooth hole. The distance X (in m) where the jet strikes the floor is $0.5$ $1.0$ $2.0$ $4.0$
A tank open at the top with a water level of $1$ m, as shown in the figure, has a hole at a height of 0.5 m. A free jet leaves horizontally from the smooth hole. The dist...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Fluid Mechanics
gateme-2018-set1
fluid-mechanics
fluid-mechanics-and-thermal-science
+
–
0
answers
0
votes
GATE2018-1-23
An ideal gas undergoes a process from state $1 \: (T_1 = 300\: K, \: p_1 = 100 \: kPa)$ to state $2 \: (T_2 = 600 \; K, \: p_2 = 500 \: kPa)$. The specific heats of the ideal gas are: $C_p = 1 \: kJ/kg-K$ and $C_v = 0.7 \: kJ/kg-K$. The change in specific entropy of the ideal gas from state $1$ to state $2$ (in $kJ/kg-K$) is ______ (correct to two decimal places).
An ideal gas undergoes a process from state $1 \: (T_1 = 300\: K, \: p_1 = 100 \: kPa)$ to state $2 \: (T_2 = 600 \; K, \: p_2 = 500 \: kPa)$. The specific heats of the...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Applications
gateme-2018-set1
numerical-answers
fluid-mechanics-and-thermal-science
applications
vapour-and-gas-power-cycles
+
–
1
answers
0
votes
GATE2018-1-22
A flat plate of width $L=1 \: m$ is pushed down with a velocity $U=0.01 \: m/s$ towards a wall resulting in the drainage of the fluid between the plate and the wall as sown in the figure. Assume two-dimensional incompressible flow and that the plate remains ... $m/s$) draining out at the instant shown in the figure is ____ (correct to three decimal places).
A flat plate of width $L=1 \: m$ is pushed down with a velocity $U=0.01 \: m/s$ towards a wall resulting in the drainage of the fluid between the plate and the wall as so...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Fluid Mechanics
gateme-2018-set1
numerical-answers
fluid-mechanics-and-thermal-science
fluid-mechanics
+
–
0
answers
0
votes
GATE2018-1-24
For a Pelton wheel with a given water jet velocity, the maximum output power from the Pelton wheel is obtained when the ratio of the bucket speed to the water jet speed is _____ (correct to two decimal places)
For a Pelton wheel with a given water jet velocity, the maximum output power from the Pelton wheel is obtained when the ratio of the bucket speed to the water jet speed i...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Applications
gateme-2018-set1
numerical-answers
fluid-mechanics-and-thermal-science
applications
pelton-wheel
+
–
0
answers
0
votes
GATE2018-1-10
Which one of the following statements is correct for a superheated vapour? Its pressure is less than the saturation pressure at a given temperature Its temperature is less than the saturation temperature at a given pressure Its volume is less than the ... the saturated vapour at a given temperature Its enthalpy is less than the enthalpy of the saturated vapour at a given pressure
Which one of the following statements is correct for a superheated vapour?Its pressure is less than the saturation pressure at a given temperatureIts temperature is less ...
Arjun
28.5k
points
Arjun
asked
Feb 17, 2018
Heat Transfer
gateme-2018-set1
heat-transfer
fluid-mechanics-and-thermal-science
+
–
Page:
« prev
1
2
3
4
5
6
...
9
next »
GO Mechanical
Email or Username
Show
Hide
Password
I forgot my password
Remember
Log in
Register