# GATE Mechanical 2014 Set 1 | Question: 22

The major difficulty during welding of aluminum is due to its

1. high tendency of oxidation
2. high thermal conductivity
3. low melting point
4. low density

recategorized

## Related questions

Match the casting defects (Group A) with the probable causes (Group B): ... $P-4, Q-3, R-2, S-1$ $P-3, Q-4, R-2, S-1$ $P-1, Q-2, R-4, S-3$
A sheet metal with a stock hardness of $250\: HRC$ has to be sheared using a punch and a die having a clearance of $\text{1 mm}$ between them. If the stock hardness of the sheet metal increases to $400\: HRC$, the clearance between the punch and the die should be _________ $mm.$
The main cutting force acting on a tool during the turning (orthogonal cutting) operation of a metal is $400$ $N$. The turning was performed using $2$ $mm$ depth of cut and $0.1$ $mm/rev$ feed rate. The specific cutting pressure (in $N$/$mm^2$) is $1000$ $2000$ $3000$ $4000$