GATE Mechanical 2014 Set 3 | Question: 22

Match the casting defects (Group A) with the probable causes (Group B):

$\begin{array}{|l|l|}\hline \textbf{Group A} & \textbf{Group B} \\ \hline \text{P: Hot tears} & \text{1. Improper fusion of two streams of liquid meal } \\ \hline \text{Q: Shrikage} & \text{2. Low permeability of the sand mould} \\ \hline \text{R: Blow holes} & \text{3. Volumetric contraction both in liquid and solid stage} \\ \hline \text{S. Cold Shut} & \text{4. Differential cooling rate} \\ \hline\end{array}$

1. $P-1, Q-3, R-2, S-4$
2. $P-4, Q-3, R-2, S-1$
3. $P-3, Q-4, R-2, S-1$
4. $P-1, Q-2, R-4, S-3$

recategorized

Related questions

A cylindrical blind riser with diameter d and height h , is placed on the top of the mold cavity of a closed type san d mold as shown in the figure. If the riser is of constant volume, then the rate of solidification in the riser is the least when the ratio h:d is $1:2$ $2:1$ $1:4$ $4:1$
A cylindrical riser of $6\text{ cm}$ diameter and $6 \text{ cm}$ height has to be designed for a sand casting mould for producing a steel rectangular plate casting of $7 \text{ cm} \times 10 \text{ cm} \times 2 \text{ cm}$ dimensions having the total solidification time of $1.36$ minute. The total solidification time (in minute) of the riser is _______