search
Log In
0 votes

An inextensible massless string goes over a frictionless pulley. Two weights of $100$ $N$ and $200$ $N$ are attached to the two ends of the string. The weights are released from rest, and start moving due to gravity. The tension in the string (in $N$) is __________

in Applied Mechanics and Design 24.6k points
recategorized by

Please log in or register to answer this question.

Answer:

Related questions

0 votes
0 answers
In a sheet metal of $2$ $mm$ thickness a hole of $10$ $mm$ diameter needs to be punched. The yield strength in tension of the sheet material is $100$ $MPa$ and its ultimate shear strength is $80$ $MPa$. The force required to punch the hole (in $kN$) is __________
asked Feb 24, 2017 in Applied Mechanics and Design Arjun 24.6k points
0 votes
0 answers
A bolted joint has four bolts arranged as shown in figure. The cross sectional area of each bolt is $25$ $mm^2$. A torque $T$ = $200N-m$ is acting on the joint. Neglecting friction due to clamping force, maximum shear stress in a bolt is ______ $MPa$.
asked Feb 24, 2017 in Applied Mechanics and Design Arjun 24.6k points
0 votes
0 answers
A single degree of freedom spring-mass system is subjected to a harmonic force of constant amplitude. For an excitation frequency of $\sqrt{\dfrac{3k}{m}}$, the ratio of the amplitude of steady state response to the static deflection of the spring is __________
asked Feb 24, 2017 in Applied Mechanics and Design Arjun 24.6k points
0 votes
0 answers
Two masses m are attached to opposite sides of a rigid rotating shaft in the vertical plane. Another pair of equal masses $m_1$ is attached to the opposite sides of the shaft in the vertical plane as shown in figure. Consider $m=1 \: kg$, $e=50 \: mm$, $e_1=20 \: mm$, $b=0.3 \: m$, $a=2 \: m$ and $a_1 = 2.5 \: m$. For the system to be dynamically balanced, $m_1$ should be ________ $kg$.
asked Feb 24, 2017 in Applied Mechanics and Design Arjun 24.6k points
0 votes
0 answers
A square plate of dimension $L \times L$ is subjected to a uniform pressure load $p=250 \: MPa$ on its edges as shown in the figure. Assume plane stress conditions. The Young’s modulus $E=200 \: GPa$ .The deformed shape is a square of dimension $L− 2\delta$. If $L = 2 \: m$ and $\delta=0.001 \: m$, the Poisson’s ratio of the plate material is __________
asked Feb 24, 2017 in Applied Mechanics and Design Arjun 24.6k points
...