# GATE2015-2-8

A gas is stored in a cylindrical tank of inner radius $7$ $m$ and wall thickness $50$ $mm$. The gage pressure of the gas is $2$ $MPa$. The maximum shear stress (in $MPa$) in the wall is

1. $35$
2. $70$
3. $140$
4. $280$

recategorized

## Related questions

The uniaxial yield stress of a material is $300$ $MPa$. According to von Mises criterion, the shear yield stress (in $MPa$) of the material is _______
A hollow shaft ($d_o$ = $2d_i$ where $d_o$ and $d_i$ are the outer and inner diameters respectively) needs to transmit $20$ $kW$ power at $3000$ $RPM$. If the maximum permissible shear stress is $30$ $MPa$, do is $11.29$ $mm$ $22.58$ $mm$ $33.87$ $mm$ $45.16$ $mm$
A hollow shaft of $1 \: m$ length is designed to transmit a power of $30\: kW$ at $700 \text{rpm}$. The maximum permissible angle of twist in the shaft is $1^{\circ}$. The inner diameter of the shaft is $0.7$ times the outer diameter. The modulus of rigidity is $80 \: GPa$. The outside diameter (in $mm$) of the shaft is__________
In a plane stress condition, the components of stress at a point are $\sigma_x =20$ $MPa$, $\sigma _y=80$ $MPa$ and $\tau_ {xy}$=$40$ $MPa$ The maximum shear stress (in $MPa$) at the point is $20$ $25$ $50$ $100$
A cantilever beam with square cross-section of $6 \: mm$ side is subjected to a load of $2 \: kN$ normal to the top surface as shown in the figure. The Young’s modulus of elasticity of the material of the beam is $210 \: GPa$. The magnitude of slope (in radian) at $Q$ ($20 \: mm$ from the fixed end) is ________