# GATE2015-2-11

The uniaxial yield stress of a material is $300$ $MPa$. According to von Mises criterion, the shear yield stress (in $MPa$) of the material is _______

recategorized

## Related questions

A gas is stored in a cylindrical tank of inner radius $7$ $m$ and wall thickness $50$ $mm$. The gage pressure of the gas is $2$ $MPa$. The maximum shear stress (in $MPa$) in the wall is $35$ $70$ $140$ $280$
A hollow shaft of $1 \: m$ length is designed to transmit a power of $30\: kW$ at $700 \text{rpm}$. The maximum permissible angle of twist in the shaft is $1^{\circ}$. The inner diameter of the shaft is $0.7$ times the outer diameter. The modulus of rigidity is $80 \: GPa$. The outside diameter (in $mm$) of the shaft is__________
A cantilever beam with square cross-section of $6 \: mm$ side is subjected to a load of $2 \: kN$ normal to the top surface as shown in the figure. The Young’s modulus of elasticity of the material of the beam is $210 \: GPa$. The magnitude of slope (in radian) at $Q$ ($20 \: mm$ from the fixed end) is ________
A rope-brake dynamometer attached to the crank shaft of an $I.C$. engine measures a brake power of $10$ $kW$ when the speed of rotation of the shaft is $400$ $rad/s$. The shaft torque (in $N$-$m$) sensed by the dynamometer is ___________
A rod is subjected to a uni-axial load within linear elastic limit. When the change in the stress is $200$ $MPa$, the change in the strain is $0.001$. If the Poisson’s ratio of the rod is $0.3$, the modulus of rigidity (in $GPa$) is ________________