# GATE2015-1-21

Match the following products with preferred manufacturing processes:

$\begin{array}{|l|l|} \hline \textbf{Product} & \textbf{Process} \\ \hline \text{P. Rails} & \text{1. Blow molding} \\ \hline \text{Q. Engine crankshaft} & \text{2. Exrusion} \\ \hline \text{R. Aluminium channels} & \text{3. Forging} \\ \hline \text{S. PET water bottles} & \text{4. Rolling} \\ \hline \end{array}$

1. $P-4, Q-3, R-1, S-2$
2. $P-4, Q-3, R-2, S-1$
3. $P-2, Q-4, R-3, S-1$
4. $P-3, Q-4, R-2, S-1$

recategorized

## Related questions

The solidification time of a casting is proportional to $\left( \dfrac{V}{A} \right )^2$, where $V$ is the volume of the casting and $A$ is the total casting surface area losing heat. Two cubes of same material and size are cast using sand casting process. The top face of one of the cubes ... face insulated to that of the other cube is $\dfrac{25}{36} \\$ $\dfrac{36}{25} \\$ $1 \\$ $\dfrac{6}{5}$
A DC welding power source has a linear voltage-current ($V$-$I$) characteristic with open circuit voltage of $80$ $V$ and a short circuit current of $300$ $A$. For maximum arc power, the current (in Amperes) should be set as_________
In a linear arc welding process, the heat input per unit length is inversely proportional to welding current welding voltage welding speed duty cycle of the power source
Which two of the following joining processes are autogeneous? Diffusion welding Electroslag welding Tungsten inert gas welding Friction welding (i) and (iv) (ii) and (iii) (ii) and (iv) (i) and (iii)
Under optimal conditions of the process the temperatures experienced by a copper work piece in fusion welding, brazing and soldering are such that $T_{\text{welding}} > T_{\text{soldering}}> T_{\text{brazing}}$ $T_{\text{soldering}} > T_{\text{welding}} > T_{\text{brazing}}$ ... $T_{\text{welding}} > T_{\text{brazing}} > T_{\text{soldering}}$