GATE2017 ME-1: 21

In a metal forming operation when the material has just started yielding. the principal stresses are $\sigma_{1}=+180 MPa, \sigma_{2}=-100 MPa, \sigma_{3}=0$. Following von Mises' criterion, the yield stress is _________ MPa.

recategorized

Related questions

A rectangular region in a solid is in a state of plane strain. The $(x, y)$ coordinates of the corners of the undeformed rectangle are given by $P(0, 0), Q(4, 0), R(4, 3), S(0, 3)$. The rectangle is subjected to uniform strains, $\varepsilon _{xx}=0.001, \varepsilon _{yy}=0.002,\gamma _{xy}=0.003$. The deformed length of the elongated diagonal, up to three decimal places is _______ units.
A motor driving a solid circular steel shaft transmits $40$ kW of power at $500$ rpm. If the diameter of the shaft is $40$ mm, the maximum shear stress in the shaft is _____________MPa.
The state of stress at a point in a component is represented by a Mohr’s circle of radius $100$ MPa centered at $200$ MPa on the thermal stress axis. On a plane passing through the same point, the normal stress is $260$ MPa. The magnitude of the shear stress on the same plane at the same point is _______ MPa
A horizontal bar, fixed at one end $(x=0)$, has a length of $1$ m, and cross-sectional area of $100 mm^{2}$. Its elastic modulus varies along its length as given by $E(x)=100 e^{-x}$ GPa, where $x$ is the length coordinate (in m) along the axis of the bar. An axial tensile load of $10$ kN is applied at the free end $(x=1)$. The axial displacement of the free end is _________ mm