search
Log In
Welcome to GO Mechanical, where you can ask questions and receive answers from other members of the community.

0 votes
The state of stress at a point in a component is represented by a Mohr’s circle of radius $100$ MPa centered at $200$ MPa on the thermal stress axis. On a plane passing through the same point, the normal stress is $260$ MPa. The magnitude of the shear stress on the same plane at the same point is _______ MPa
in Others 21.2k points 4 126 349
retagged by

Please log in or register to answer this question.

Answer:

Related questions

0 votes
0 answers
In a metal forming operation when the material has just started yielding. the principal stresses are $\sigma_{1}=+180 MPa, \sigma_{2}=-100 MPa, \sigma_{3}=0$. Following von Mises' criterion, the yield stress is _________ MPa.
asked Feb 27, 2017 in Others Arjun 21.2k points
0 votes
0 answers
A wire of circular cross-section of diameter $1.0$ mm is bent into a circular arc of radius. $1.0$ m by application of pure bending moments at its ends. The Young’s modulus of the material of the wire is $100$ GPa. The maximum tensile stress developed in the wire is ______ MPa
asked Feb 9, 2019 in Others Arjun 21.2k points
0 votes
0 answers
A horizontal cantilever beam of circular cross-section, length $1.0$ m and flexural rigidity $EI=200 \: N \cdot m^2$ is subjected to an applied moment $M_A = 1.0 \: N \cdot m$ at the free end as shown in the figure. The magnitude of the vertical deflection of the free end is ______ mm (round off to one decimal place).
asked Feb 9, 2019 in Others Arjun 21.2k points
0 votes
0 answers
Two masses $A$ and $B$ having mass $m_a$ and $m_b$, respectively, lying in the plane of the figure shown, are rigidly attached to a shaft which revolves about an axis through O perpendicular to the plane of the figure. The radii of rotation of the masses $m_a$ and $m_b$ ... $r_b=400$mm, then the balance mass to be placed at a radius of $200$ mm is _________ kg (round off to two decimal places).
asked Feb 9, 2019 in Others Arjun 21.2k points
0 votes
0 answers
A cylindrical rod of diameter $10$ mm and length $0.1$m fixed at one end. The other end is twisted by an angle of $10^{\circ}$ by applying a torque. If the maximum shear strain in the rod is $p \times 10^{-3}$, then $p$ is equal to ____ (round off to two decimal places).
asked Feb 9, 2019 in Others Arjun 21.2k points
...