search
Log In
0 votes
In a compression ignition engine, the inlet air pressure is $1$ bar and the pressure at the end of isentropic compression is $32.42$ bar. The expansion ratio is $8$. Assuming ratio of specific heats $(γ)$ as $1.4$, the air standard efficiency (in percent) is _______
in Applications 24.6k points
recategorized by

Please log in or register to answer this question.

Answer:

Related questions

0 votes
0 answers
An air standard Otto cycle has thermal efficiency of $0.5$ and the mean effective pressure of the cycle is $1000 \: kPa$. For air, assume specific heat ratio $\gamma=1.4$ and specific gas constant $R=0.287 \: kJ/kg \cdot K$. If the pressure and temperature at the ... and $300 \: K$, respectively, then the specific net work output of the cycle is _____ $kJ/kg $ (round off to two decimal places).
asked Feb 9, 2019 in Applications Arjun 24.6k points
0 votes
0 answers
Steam with specific enthalpy $(h)$ $3214$ $kJ/kg$ enters an adiabatic turbine operating at steady state with a flow rate $10$ $kg/s$. As it expands, at a point where h is $2920$ $kJ/kg$, $1.5$ $kg/s$ is extracted for heating purposes. The remaining $8.5$ ... , where $h$ = $2374$ $kJ/kg$. Neglecting changes in kinetic and potential energies, the net power output (in $kW$) of the turbine is _______
asked Feb 19, 2017 in Applications Arjun 24.6k points
0 votes
0 answers
A reversed Carnot cycle refrigerator maintains a temperature of −$5^{\circ}$ $C$. The ambient air temperature is $35^{\circ}$ $C$. The heat gained by the refrigerator at a continuous rate is $2.5$ kJ/s. The power (in watt) required to pump this heat out continuously is _______
asked Feb 19, 2017 in Applications Arjun 24.6k points
0 votes
0 answers
The torque (in $N$-$m$) exerted on the crank shaft of a two stroke engine can be described as $T = 10000 + 1000 \sin(2θ) − 1200 \cos(2θ)$, where $θ$ is the crank angle as measured from inner dead center position. Assuming the resisting torque to be constant, the power (in $kW$) developed by the engine at $100$ $rpm$ is ________
asked Feb 24, 2017 in Applications Arjun 24.6k points
0 votes
0 answers
A Carnot engine ($CE_1$) works between two temperature reservoirs $A$ and $B$, where $T_A$ = $900$ $K$ and $T_B$ = $500$ $K$. A second Carnot engine ($CE_2$) works between temperature reservoirs $B$ and $C$, where $T_C$ = $300$ $K$. In each cycle of $CE_1$ and ... $Q$ absorbed by $CE_1$ from reservoir $A$ is $150$ $MJ$, the net heat rejected to reservoir $C$ by $CE_2$ (in $MJ$) is ______________
asked Feb 24, 2017 in Applications Arjun 24.6k points
...