# GATE Mechanical 2014 Set 2 | Question: 47

Steam at a velocity of $10$ $m/s$ enters the impulse turbine stage with symmetrical blading having blade angle $30^\circ$. The enthalpy drop in the stage is $100 kJ$. The nozzle angle is $20^\circ$. The maximum blade efficiency (in percent) is _______

recategorized

## Related questions

Steam with specific enthalpy $(h)$ $3214$ $kJ/kg$ enters an adiabatic turbine operating at steady state with a flow rate $10$ $kg/s$. As it expands, at a point where h is $2920$ $kJ/kg$, $1.5$ $kg/s$ is extracted for heating purposes. The remaining $8.5$ ... , where $h$ = $2374$ $kJ/kg$. Neglecting changes in kinetic and potential energies, the net power output (in $kW$) of the turbine is _______
At the inlet of an axial impulse turbine rotor, the blade linear speed is $25 \: m/s$, the magnitude of absolute velocity is $100 \: m/s$ and the angle between them is $25^{\circ}$. The relative velocity and the axial component of velocity remain the same ... blades. The blade inlet and outlet velocity triangles are shown in the figure. Assuming no losses, the specific work (in $J/kg$) is _______
Consider a simple gas turbine (Brayton) cycle and a gas turbine cycle with perfect regeneration. In both the cycles, the pressure ratio is $6$ and the ratio of the specific heats of the working medium is $1.4$. The ratio of minimum to maximum temperatures is ... $K$) in the regenerative cycle. The ratio of the thermal efficiency of the simple cycle to that of the regenerative cycle is _________
A heat pump with refrigerant $R22$ is used for space heating between temperature limits of $−20^\circ C$ and $25^ \circ C$. The heat required is $200 MJ/h$. Assume specific heat of vapour at the time of discharge as $0.98 kJ/kg.K$. Other relevant properties are given below. The enthalpy (in $kJ/kg$) of the refrigerant at isentropic compressor discharge is _______
The difference in pressure (in $N/m^2$) across an air bubble of diameter $0.001$ $m$ immersed in water (surface tension $= 0.072$ $N/m$) is _______