# GATE Mechanical 2014 Set 1 | Question: 53

For the given assembly: $25 \: H7/g8$, match Group $A$ with Group $B$

$$\begin{array}{|c|l|c|l|} \hline & \textbf{Group A} & & \textbf{Group B} \\ \hline P. & \text{H} & I. & \text{Shaft Type} \\ \hline Q. & \text{IT8} & II. & \text{Hole Type} \\ \hline R. & \text{IT7} & III. & \text{Hole Tolerance Grade} \\ \hline S. & \text{g} & IV. & \text{Shaft Tolerance Grade} \\ \hline \end{array}$$

1. $P-I, Q-III, R-IV, S-II$
2. $P-I, Q-IV, R-III, S-II$
3. $P-II, Q-III, R-IV, S-I$
4. $P-II, Q-IV, R-III, S-I$

recategorized

## Related questions

A hydrodynamic journal bearing is subject to $2000$ N load at a rotational speed of $2000$ rpm. Both bearing bore diameter and length are $40$ mm. If radial clearance is µm and bearing is lubricated with an oil having viscosity $0.03$ $P_{a.s}$, the Sommerfeld number of the bearing is ______
A rigid uniform rod $AB$ of length $L$ and mass $m$ is hinged at $C$ such that $AC = L/3$, $CB = 2L/3$. Ends $A$ and $B$ are supported by springs of spring constant k. The natural frequency of the system is given by $\sqrt{\dfrac{k}{2m}} \\$ $\sqrt{\dfrac{k}{m}} \\$ $\sqrt{\dfrac{2k}{m} } \\$ $\sqrt{\dfrac{5k}{m}}$
A slider crank mechanism has slider mass of $10$ kg, stroke of $0.2$ m and rotates with a uniform angular velocity of $10$ rad/s. The primary inertia forces of the slider are partially balanced by a revolving mass of $6$ kg at the crank, placed at a distance ... When the crank angle (with respect to slider axis) is $30^\circ$, the unbalanced force (in newton) normal to the slider axis is _____
A block weighing $200 N$ is in contact with a level plane whose coefficients of static and kinetic friction are $0.4$ and $0.2$, respectively. The block is acted upon by a horizontal force (in newton) $P=10t$, where $t$ denotes the time in seconds. The velocity (in $m/s$) of the block attained after $10$ seconds is _______