# GATE Mechanical 2014 Set 1 | Question: 37

An offset slider-crank mechanism is shown in the figure at an instant. Conventionally, the Quick Return Ratio (QRR) is considered to be greater than one. The value of QRR is _______

recategorized

## Related questions

A hydrodynamic journal bearing is subject to $2000$ N load at a rotational speed of $2000$ rpm. Both bearing bore diameter and length are $40$ mm. If radial clearance is µm and bearing is lubricated with an oil having viscosity $0.03$ $P_{a.s}$, the Sommerfeld number of the bearing is ______
A slider crank mechanism has slider mass of $10$ kg, stroke of $0.2$ m and rotates with a uniform angular velocity of $10$ rad/s. The primary inertia forces of the slider are partially balanced by a revolving mass of $6$ kg at the crank, placed at a distance ... When the crank angle (with respect to slider axis) is $30^\circ$, the unbalanced force (in newton) normal to the slider axis is _____
A block weighing $200 N$ is in contact with a level plane whose coefficients of static and kinetic friction are $0.4$ and $0.2$, respectively. The block is acted upon by a horizontal force (in newton) $P=10t$, where $t$ denotes the time in seconds. The velocity (in $m/s$) of the block attained after $10$ seconds is _______
Consider a cantilever beam, having negligible mass and uniform flexural rigidity, with length $0.01$ $m$. The frequency of vibration of the beam, with a $0.5$ $kg$ mass attached at the free tip, is $100$ $Hz$. The flexural rigidity (in $N$.$m^2$) of the beam is _______
A pair of spur gears with module $5$ $mm$ and a center distance of $450$ $mm$ is used for a speed reduction of $5:1$. The number of teeth on pinion is _______