# GATE Mechanical 2014 Set 1 | Question: 44

For a fully developed flow of water in a pipe having diameter $10$ $cm$, velocity $0.1$ $m/s$ and kinematic viscosity $10^{−5}$ $m^2$/$s$, the value of Darcy friction factor is _______

recategorized

## Related questions

Water flows through a pipe having an inner radius of $10 mm$ at the rate of $36 \: kg/hr$ at $25^ \circ C$. The viscosity of water at $25^ \circ C$ is $0.001 \: kg/m.s$. The Reynolds number of the flow is _______
An ideal water jet with volume flow rate of $0.05$ $m^3$/$s$ strikes a flat plate placed normal to its path and exerts a force of $1000$ $N$. Considering the density of water as $1000kg$/$m^3$,the diameter(in $mm$) of the water jet is _______
Water flows through a $10$ $mm$ diameter and $250$ $m$ long smooth pipe at an average velocity of $0.1 m/s$. The density and the viscosity of water are $997$ $kg/m^3$ and $855×10^−6$ $N.s/m^2$, respectively. Assuming fully-developed flow, the pressure drop (in $Pa$) in the pipe is _______
Consider steady, viscous, fully developed flow of a fluid through a circular pipe of internal diameter $\text{D}$. We know that the velocity profile forms a paraboloid about the pipe centre line, given by: $V=-C\left(r^{2}-\dfrac{D^{2}}{4}\right) m/s$, where $C$ is a ... $\text{A-B}$, as shown in the figure, is proportional to $D^{n}$. The value of $n$ is ________.
Water flows through a pipe with a velocity given by $\overrightarrow{V}= \bigg( \dfrac{4}{t}+x+y \bigg) \hat{j} \: m/s$, where $\hat{j}$ is the unit vector in the $y$ direction, $t(>0)$ is in seconds, and $x$ and $y$ are in meters. The magnitude of total acceleration at the point $(x,y)=(1,1)$ at $t=2\: s$ is ______$m/s^2$