Most viewed questions in Mechanics of Materials / GO Mechanical

0 answers

0 votes

GATE2015-2-37
A hollow shaft of $1 \: m$ length is designed to transmit a power of $30\: kW$ at $700 \text{rpm}$. The maximum permissible angle of twist in the shaft is $1^{\circ}$. The inner diameter of the shaft is $0.7$ times the outer diameter. The modulus of rigidity is $80 \: GPa$. The outside diameter (in $mm$) of the shaft is__________

A hollow shaft of $1 \: m$ length is designed to transmit a power of $30\: kW$ at $700 \text{rpm}$. The maximum permissible angle of twist in the shaft is $1^{\circ}$. Th...

Arjun

28.5k points

Arjun asked Feb 24, 2017

0 answers

0 votes

GATE2015-2-7
A rod is subjected to a uni-axial load within linear elastic limit. When the change in the stress is $200$ $MPa$, the change in the strain is $0.001$. If the Poisson’s ratio of the rod is $0.3$, the modulus of rigidity (in $GPa$) is ________________

A rod is subjected to a uni-axial load within linear elastic limit. When the change in the stress is $200$ $MPa$, the change in the strain is $0.001$. If the Poisson’s ...

Arjun

28.5k points

Arjun asked Feb 24, 2017

0 answers

0 votes

GATE2015-2-38
A hollow shaft ($d_o$ = $2d_i$ where $d_o$ and $d_i$ are the outer and inner diameters respectively) needs to transmit $20$ $kW$ power at $3000$ $RPM$. If the maximum permissible shear stress is $30$ $MPa$, do is $11.29$ $mm$ $22.58$ $mm$ $33.87$ $mm$ $45.16$ $mm$

A hollow shaft ($d_o$ = $2d_i$ where $d_o$ and $d_i$ are the outer and inner diameters respectively) needs to transmit $20$ $kW$ power at $3000$ $RPM$. If the maximum per...

Arjun

28.5k points

Arjun asked Feb 24, 2017

0 answers

0 votes

GATE2015-3-5
The strain hardening exponent $n$ of stainless steel SS $304$ with distinct yield and UTS values undergoing plastic deformation is $n < 0$ $n = 0$ $0 < n < 1$ $n = 1$

The strain hardening exponent $n$ of stainless steel SS $304$ with distinct yield and UTS values undergoing plastic deformation is$n < 0$$n = 0$$0 < n < 1$$n = 1$

Arjun

28.5k points

Arjun asked Feb 24, 2017

0 answers

0 votes

GATE2015-2-34
In a plane stress condition, the components of stress at a point are $\sigma_x =20$ $MPa$, $\sigma _y=80$ $MPa$ and $\tau_ {xy}$=$40$ $MPa$ The maximum shear stress (in $MPa$) at the point is $20$ $25$ $50$ $100$

In a plane stress condition, the components of stress at a point are $\sigma_x =20$ $MPa$, $\sigma _y=80$ $MPa$ and $\tau_ {xy}$=$40$ $MPa$ The maximum shear stress (in $...

Arjun

28.5k points

Arjun asked Feb 24, 2017

0 answers

0 votes

GATE2016-2-23
The value of true strain produced in compressing a cylinder to half its original length is $0.69$ $-0.69$ $0.5$ $-0.5$

The value of true strain produced in compressing a cylinder to half its original length is$0.69$$-0.69$$0.5$$-0.5$

Arjun

28.5k points

Arjun asked Feb 24, 2017