# GATE2016-2-23

The value of true strain produced in compressing a cylinder to half its original length is

1. $0.69$
2. $-0.69$
3. $0.5$
4. $-0.5$

recategorized

## Related questions

In a structural member under fatigue loading, the minimum and maximum stresses developed at the critical point are $50$ $MPa$ and $150$ $MPa$, respectively. The endurance, yield, and the ultimate strengths of the material are $200$ $MPa$, $300$ $MPa$ and $400$ $MPa$, respectively. The factor of safety using modified Goodman criterion is $\dfrac{3}{2} \\$ $\dfrac{8}{5} \\$ $\dfrac{12}{7} \\$ $2$
In the figure, the load $P=1 \: N$, length $L=1 \: m$, Young’s modulus $E=70 \: GPa$, and the cross-section of the links is a square with dimension $10 \: mm \times 10 \: mm$. All joints are pin joints. The stress (in $Pa$) in the link $AB$ is ___________ (Indicate compressive stress by a negative sign and tensile stress by a positive sign.)
A simply supported beam of length $2L$ is subjected to a moment $M$ at the mid-point $x = 0$ as shown in the figure. The deflection in the domain $0 \leq x \leq L$ is given by $w=\dfrac{-Mx}{12EIL}(L-x)(x+c)$ where $E$ is the Young's modulus, $I$ is the area moment of inertia ... $x$ = $0$ is $ML/(2EI)$ $ML/(3EI)$ $ML/(6EI)$ $ML/(12EI)$
A rigid horizontal rod of length $2L$ is fixed to a circular cylinder of radius $R$ as shown in the figure. Vertical forces of magnitude $P$ are applied at the two ends as shown in the figure. The shear modulus for the cylinder is $G$ and the Young’s modulus is $E$. The vertical deflection at point A is $PL^3/(\pi R^4G)$ $PL^3/(\pi R^4E)$ $2PL^3/(\pi R^4E)$ $4PL^3/(\pi R^4G)$