# GATE2016-1-18

Consider two hydraulic turbines having identical specific speed and effective head at the inlet. If the speed ratio $\displaystyle{\left(\frac{N_1}{N_2}\right)}$ of the two turbines is $2$, then the respective power ratio $\displaystyle{\left(\frac{P_1}{P_2}\right)}$ is _____________

recategorized

## Related questions

Consider a simple gas turbine (Brayton) cycle and a gas turbine cycle with perfect regeneration. In both the cycles, the pressure ratio is $6$ and the ratio of the specific heats of the working medium is $1.4$. The ratio of minimum to maximum temperatures is ... $K$) in the regenerative cycle. The ratio of the thermal efficiency of the simple cycle to that of the regenerative cycle is _________
In a steam power plant operating on an ideal Rankine cycle, superheated steam enters the turbine at $3 \: MPa$ and $350^ \circ C$. The condenser pressure is $75$ $kPa$. The thermal efficiency of the cycle is ________ percent. Given data: For saturated liquid, at $P=75 \:kPa$, $h_f=384.39 \:kJ/kg$ ... $P = 3 \: MPa$ and $T=350^\circ C$ (superheated steam), $h=3115.3 \: kJ/kg$, $s=6.7428 \: kJ/kg-K$
An ideal gas undergoes a reversible process in which the pressure varies linearly with volume. The conditions at the start (subscript $1$) and at the end (subscript $2$) of the process with usual notation are: $p_1 = 100 \: kPa$, $V_1 = 0.2 \: m^3$ and $p_2=200 \: kPa$ ... $R=0.275\:kJ/kg-K$. The magnitude of the work required for the process (in $kJ$) is ________
The pressure ratio across a gas turbine (for air, specific heat at constant pressure, $c_{p}=1040 J/kg.K$ and ratio of specific heats, $\gamma=1.4$) is $10$. If the inlet temperature to the turbine is $1200$ K and the isentropic efficiency is $0.9$, the gas temperature at turbine exit is ________ $K$
Steam enters a well insulated turbine and expands isentropically throughout. At an intermediate pressure, $20$ percent of the mass is extracted for process heating and the remaining steam expands isentropically to $9 \: kPa$ ... $100$ $kg/s$, then the work output (in $MW$) is _________