# GATE Mechanical 2014 Set 3 | Question: 38

A slider-crank mechanism with crank radius $60$ $mm$ and connecting rod length $240$ $mm$ is shown in figure. The crank is rotating with a uniform angular speed of $10$ $rad/s$, counter clockwise. For the given configuration, the speed (in $m/s$) of the slider is _______

recategorized

## Related questions

Gear $2$ rotates at $1200$ $rpm$ in counter clockwise direction and engages with Gear $3$. Gear $3$ and Gear $4$ are mounted on the same shaft. Gear $5$ engages with Gear $4$. The numbers of teeth on Gears $2$, $3$, $4$ and $5$ are $20$ ... $5$ is $300$ $rpm$ counterclockwise $300$ $rpm$ clockwise $4800$ $rpm$ counterclockwise $4800$ $rpm$ clockwise
For spot welding of two steel sheets (base metal) each of $3$ $mm$ thickness, welding current of $10000$ $A$ is applied for $0.2$ $s$. The heat dissipated to the base metal is $1000$ $J$. Assuming that the heat required for melting $1$ $mm^3$ volume of steel is $20$ $J$ and interfacial contact resistance between sheets is $0.0002$ $Ω$, the volume (in $mm^3$) of weld nugget is _______
A mass-spring-dashpot system with mass $m = 10$ $kg$, spring constant $k = 6250$ $N/m$ is excited by a harmonic excitation of $10 cos(25t)$ $N$. At the steady state, the vibration amplitude of the mass is $40$ $mm$. The damping coefficient ($c$, in $N.s/m$) of the dashpot is _______
A four-wheel vehicle of mass $1000 \: kg$ moves uniformly in a straight line with the wheels revolving at $10 \: rad/s$. The wheels are identical, each with a radius of $0.2 \: m$. Then a constant braking torque is applied to all the wheels and the vehicle experiences a uniform deceleration. For the vehicle to stop in $10 \: s$, the braking torque (in $N.m$) on each wheel is______
The damping ratio of a single degree of freedom spring-mass-damper system with mass of $1 kg$, stiffness $100 N/m$ and viscous damping coefficient of $25 N.s/m$ is _______