# GATE2017 ME-2: 31

The radius of gyration of a compound pendulum about the point of suspension is $100$ mm. The distance between the point of suspension and the centre of mass is $250$ mm. Considering the acceleration due to gravity as $9.81 m/s^{2}$, the natural frequency (in radian/s) of the compound pendulum is ________.

recategorized

## Related questions

Three masses are connected to a rotating shaft supported on bearings $A$ and $B$ as shown in the figure. The system is in a space where the gravitational effect is absent. Neglect the mass of shaft and rods connecting the masses. For $m_{1}= 10 kg, m_{2}=5 kg$ and ... $1000$ radian/s, the magnitude of the bearing reaction (in N) at location $B$ is ___________.
A helical compression spring made of a wire of circular cross-section is subjected to a compressive load. The maximum shear stress induced in the cross-section of the wire is $24$MPa. For the same compressive load, if both the wire diameter and the mean coil diameter are doubled, the maximum shear stress (in MPa) induced in the cross-section of the wire is __________.
Block $2$ slides outward on link $1$ at a uniform velocity of $6$ m/s as shown in the figure. Link $1$ is rotating at a constant angular velocity of $20$ radian/s counterclockwise. The magnitude of the total acceleration (in $m/s^{2}$) of point $P$ of the block with respect to fixed point $O$ is __________.
In a slider-crank mechanism, the lengths of the crank and the connecting rod are $100$ mm and $160$ mm, respectively. The crank is rotating with an angular velocity of $10$ radian/s counter-clockwise. The magnitude of linear velocity (in m/s) of the piston at the instant corresponding to the configuration shown in the figure is ________.
A steel plate, connected to a fixed channel using three identical bolts $A, B$ and $C$, carries a load of $6$ kN as shown in the figure. Considering the effect of direct load and moment, the magnitude of resultant shear force (in kN) on bolt $C$ is $13$ $15$ $17$ $30$