# GATE Mechanical 2014 Set 2 | Question: 36

A truck accelerates up a $10^0$ incline with a crate of $100$ $kg$. Value of static coefficient of friction between the crate and the truck surface is $0.3$. The maximum value of acceleration (in $m$/$s^2$) of the truck such that the crate does not slide down is _______

recategorized

## Related questions

What is the natural frequency of the spring mass system shown below? The contact between the block and the inclined plane is frictionless. The mass of the block is denoted by m and the spring constants are denoted by $k_1$ and $k_2$ as shown below. $\sqrt{\dfrac{k_1+k_2}{2m}} \\$ $\sqrt{\dfrac{k_1+k_2}{4m}} \\$ $\sqrt{\dfrac{k_1-k_2}{m}} \\$ $\sqrt{\dfrac{k_1+k_2}{m}}$
A $4$-bar mechanism with all revolute pairs has link lengths $l_f$ = $20$ $mm$, $l_{\text{in}} = 40$ $mm$, $l_{\text{co}} =50$ $mm$ and $l_{\text{out}} =60$ $mm$. The suffixes $\text{ f'}$ ... can execute full circular motion Both links cannot execute full circular motion Only the output link cannot execute full circular motion Only the input link cannot execute full circular motion
A point mass is executing simple harmonic motion with an amplitude of $10$ $mm$ and frequency of $4$ $Hz$. The maximum acceleration ($m/s^2$) of the mass is _______
A body of mass (M) $10$ $kg$ is initially stationary on a $45^{\circ}$ inclined plane as shown in figure. The coefficient of dynamic friction between the body and the plane is $0.5$. The body slides down the plane and attains a velocity of $20 m/s$. The distance traveled (in meter) by the body along the plane is _______
A spur pinion of pitch diameter $50$ $mm$ rotates at $200$ $rad/s$ and transmits $3 kW$ power. The pressure angle of the tooth of the pinion is $20^\circ$. Assuming that only one pair of the teeth is in contact, the total force (in newton) exerted by a tooth of the pinion on the tooth on a mating gear is _______