search
Log In
0 votes
In a mixture of dry air and water vapor at a total pressure of $750$ $mm$ of $Hg$, the partial pressure of water vapor is $20$ $mm$ of $Hg$. The humidity ratio of the air in grams of water vapor per $kg$ of dry air ($g_w/kg_{da}$) is __________
in Applications 24.6k points
recategorized by

Please log in or register to answer this question.

Answer:

Related questions

0 votes
0 answers
In the vapour compression cycle shown in the figure, the evaporating and condensing temperatures are $260 \: K$ and $310 \: K$, respectively. The compressor takes in liquid-vapour mixture (state $1$) and isentropically compresses it to a dry saturated vapour condition (state $2$). ... is $1054 \: kJ/kg$. The difference between the enthalpies at state points $1$ and $0$ (in $kJ/kg$) is ____________
asked Feb 24, 2017 in Applications Arjun 24.6k points
0 votes
0 answers
In a $3$-stage air compressor, the inlet pressure is $p_1$, discharge pressure is $p_4$.and the intermediate pressures are $p_2$ and $p_3 ( p_2 < p_3)$. The total pressure ratio of the compressor is $10$ and the pressure ratios of the stages are equal. If $p_1 = 100$ $kPa$, the value of the pressure $p_3$ (in $kPa$) is __________
asked Feb 24, 2017 in Applications Arjun 24.6k points
0 votes
0 answers
The blade and fluid velocities for an axial turbine are as shown in the figure. The magnitude of absolute velocity at entry is $300$ $m/s$ at an angle of $65^\circ$ ... the downward direction. Given that the axial (horizontal) velocity is the same at entry and exit, the specific work (in $kJ/kg$) is__________
asked Feb 24, 2017 in Applications Arjun 24.6k points
0 votes
0 answers
A bullet spins as the shot is fired from a gun. For this purpose, two helical slots as shown in the figure are cut in the barrel. Projections $A$ and $B$ on the bullet engage in each of the slots. Helical slots are such that one turn of helix is completed over a distance of $0.5$ $m$. If velocity of bullet when it exits the barrel is $20$ $m/s$, its spinning speed in $rad/s$ is ________
asked Feb 24, 2017 in Applications Arjun 24.6k points
0 votes
0 answers
Steam flows through a nozzle at a mess flow rate of $m=0.1 \: kg/s$ with a heat loss of $5 \: kW$. The enthalpies at inlet and exit are $2500 \: kJ/kg$ and $2350 \: kJ/kg$, respectively. Assuming negligible velocity in inlet ($C_1 \approx 0$), the velocity ($C_2$) of steam (in $m/s$) at the nozzle exit is _____ (correct to two decimal places).
asked Feb 17, 2018 in Applications Arjun 24.6k points
...