GATE2016-3-15

Steady one-dimensional heat conduction takes place across the faces $1$ and $3$ of a composite slab consisting of slabs $A$ and $B$ in perfect contact as shown in the figure, where $k_A$ , $k_B$ denote the respective thermal conductivities. Using the data as given in the figure, the interface temperature $T_2$ (in $^\circ C$) is __________

recategorized

Related questions

Two optically flat plates of glass are kept at a small angle $\theta$ as shown in the figure. Monochromatic light is incident vertically. If the wavelength of light used to get a fringe spacing of $1$ $mm$ is $450$ $nm$, the wavelength of light (in $nm$) to get a fringe spacing of $1.5$ $mm$ is _________
A cylindrical steel rod, $0.01 \: m$ in diameter and $0.2 \: m$ in length is first heated to $750^ \circ C$ and then immersed in a water bath at $100^ \circ C$. The heat transfer coefficient is $250 \: W/m^2-K$. The density, specific heat and thermal conductivity of steel ... $k=43 \: W/m-K$, respectively. The time required for the rod to reach $300^ \circ C$ is ________ seconds.
Two large parallel plates having a gap of $10 \: mm$ in between them are maintained at temperatures $T_1 = 1000 \: K$ and $T_2 = 400 \: K$. Given emissivity values, $\epsilon _1 = 0.5$, $\epsilon _2=0.25$ and Stefan-Boltzmann constant $\sigma =5.67 \times 10^{−8} \: W/m^2-K^4$, the heat transfer between the plates (in $kW/m^2$) is __________
For a heat exchanger, $\triangle T_{\text{max}}$ is the maximum temperature difference and $\triangle T_{\text{min}}$ is the minimum temperature difference between the two fluids. LMTD is the log mean temperature difference. $C_{\text{min}}$ and $C_{\text{max}}$ are the minimum and the ... $C_{\text{max}} \triangle T_{\text{max}}$ $C_{\text{max}} \triangle T_{\text{min}}$