# GATE2016-1-24

In an orthogonal cutting process the tool used has rake angle of zero degree. The measured cutting force and thrust force are $500 \: N$ and $250 \: N$, respectively. The coefficient of friction between the tool and the chip is _________

recategorized

## Related questions

The tool life equation for HSS tool is $VT^{0.14}f^{0.7}d^{0.4}$ = constant. The tool life $(T)$ of $30 \: min$ is obtained using the following cutting conditions: $V=45\:m/min$, $f=0.35 \: mm$, $d=2.0 \: mm$ If speed $(V)$, feed $(f)$ and depth of cut $(d)$ are increased individually by $25\%$, the tool life (in $min$) is $0.15$ $1.06$ $22.50$ $30.0$
The following data is applicable for a turning operation. The length of job is $900$ $mm$, diameter of job is $200$ $mm$, feed rate is $0.25$ $mm/rev$ and optimum cutting speed is $300$ $m/min$. The machining time (in $min$) is __________
Metric thread of $0.8$ mm pitch is to be cut on a lathe. Pitch of the lead screw is $1.5$ mm. If the spindle rotates at $1500$ rpm, the speed of rotation of the lead screw (rpm) will be ________.
The annual demand for an item is $10,000$ units. The unit cost is $Rs$. $100$ and inventory carrying charges are $14.4\%$ of the unit cost per annum. The cost of one procurement is $Rs$. $2000$. The time between two consecutive orders to meet the above demand is _______ month($s$).