# GATE2015-3-48

A cantilever bracket is bolted to a column using three M$12×1.75$ bolts P, Q and R. The value of maximum shear stress developed in the bolt P (in $MPa$) is ________

recategorized

## Related questions

For the overhanging beam shown in figure, the magnitude of maximum bending moment (in $kN$-$m$) is ________
A cylindrical tank with closed ends is filled with compressed air at a pressure of $500$ $kPa$. The inner radius of the tank is $2$ $m$, and it has wall thickness of $10$ $mm$. The magnitude of maximum in-plane shear stress (in $MPa$) is ________
A cantilever beam with flexural rigidity of $200$ $N.m^2$ is loaded as shown in the figure. The deflection (in $mm$) at the tip of the beam is _______
Consider a stepped shaft subjected to a twisting moment applied at $B$ as shown in the figure. Assume shear modulus, $G$ = $77$ $GPa$. The angle of twist at $C$ (in degrees) is __________
The dimensions of a cylindrical side riser (height = diameter) for a $25 \: cm \times 15 \: cm \times 5 \: cm$ steel casting are to be determined. For the tabulated shape factor values given below, the diameter of the riser (in $cm$ ...