# GATE2015-3-34

Orthogonal turning of a mild steel tube with a tool of rake angle $10^\circ$ is carried out at a feed of $0.14 mm/rev$. If the thickness of the chip produced is $0.28 mm$, the values of shear angle and shear strain will be respectively

1. $28^\circ 20′$ and $2.19$
2. $22^\circ 20′$ and $3.53$
3. $24^\circ 30′$ and $4.19$
4. $37^\circ 20′$ and $5.19$

recategorized

## Related questions

In a CNC milling operation, the tool has to machine the circular arc from point $(20, 20)$ to $(10, 10)$ at sequence number $5$ of the CNC part program. If the center of the arc is at $(20, 10)$ and the machine has incremental mode of defining position coordinates, the correct tool path command is N $05$ G$90$ ... $10$ R$10$ N $05$ G$90$ G$03$ X$20$ Y$20$ R$10$ N $05$ G$91$ G$02$ X$20$ Y$20$ R$10$
The annual requirement of rivets at a ship manufacturing company is $2000 \: kg$. The rivets are supplied in units of $1 \: kg$ costing $Rs. 25$ each. If it costs $Rs. 100$ to place an order and the annual cost of carrying one unit is $9\%$ of its purchase cost, the cycle length of the order (in days) will be ________
Ratio of solidification time of a cylindrical casting (height = radius) to that of a cubic casting of side two times the height of cylindrical casting is ________
In a rolling operation using rolls of diameter $500$ $mm$, if a $25$ $mm$ thick plate cannot be reduced to less than $20$ $mm$ in one pass, the coefficient of friction between the roll and the plate is ________
The value of moment of inertia of the section shown in the figure about the axis-XX is $8.5050×10^6$ $mm^4$ $6.8850×10^6$ $mm^4$ $7.7625×10^6$ $mm^4$ $8.5725×10^6$ $mm^4$