search
Log In
0 votes
A rope-brake dynamometer attached to the crank shaft of an $I.C$. engine measures a brake power of $10$ $kW$ when the speed of rotation of the shaft is $400$ $rad/s$. The shaft torque (in $N$-$m$) sensed by the dynamometer is ___________
in Mechanics of Materials 24.6k points
recategorized by

Please log in or register to answer this question.

Answer:

Related questions

0 votes
0 answers
A hollow shaft of $1 \: m$ length is designed to transmit a power of $30\: kW$ at $700 \text{rpm}$. The maximum permissible angle of twist in the shaft is $1^{\circ}$. The inner diameter of the shaft is $0.7$ times the outer diameter. The modulus of rigidity is $80 \: GPa$. The outside diameter (in $mm$) of the shaft is__________
asked Feb 24, 2017 in Mechanics of Materials Arjun 24.6k points
0 votes
0 answers
A cantilever beam with square cross-section of $6 \: mm$ side is subjected to a load of $2 \: kN$ normal to the top surface as shown in the figure. The Young’s modulus of elasticity of the material of the beam is $210 \: GPa$. The magnitude of slope (in radian) at $Q$ ($20 \: mm$ from the fixed end) is ________
asked Feb 24, 2017 in Mechanics of Materials Arjun 24.6k points
0 votes
0 answers
The uniaxial yield stress of a material is $300$ $MPa$. According to von Mises criterion, the shear yield stress (in $MPa$) of the material is _______
asked Feb 24, 2017 in Mechanics of Materials Arjun 24.6k points
0 votes
0 answers
A rod is subjected to a uni-axial load within linear elastic limit. When the change in the stress is $200$ $MPa$, the change in the strain is $0.001$. If the Poisson’s ratio of the rod is $0.3$, the modulus of rigidity (in $GPa$) is ________________
asked Feb 24, 2017 in Mechanics of Materials Arjun 24.6k points
0 votes
0 answers
A hollow shaft ($d_o$ = $2d_i$ where $d_o$ and $d_i$ are the outer and inner diameters respectively) needs to transmit $20$ $kW$ power at $3000$ $RPM$. If the maximum permissible shear stress is $30$ $MPa$, do is $11.29$ $mm$ $22.58$ $mm$ $33.87$ $mm$ $45.16$ $mm$
asked Feb 24, 2017 in Mechanics of Materials Arjun 24.6k points
...