# GATE Mechanical 2014 Set 2 | Question: 21

A robot arm $PQ$ with end coordinates $P(0,0)$ and $Q(2,5)$ rotates counter clockwise about $P$ in the $XY$ plane by $90^\circ$. The new coordinate pair of the end point Q is

1. $(−2,5)$
2. $(−5,2)$
3. $(−5, −2)$
4. $(2, −5)$

recategorized

## Related questions

For the CNC part programming, match Group A with Group B: ... $P-I, Q-III, R-II, S-IV$ $P-I, Q-IV, R-II, S-III$ $P-II, Q-I, R-III, S-IV$
For machining a rectangular island represented by coordinates $P(0,0), Q(100,0), R(100,50)$ and $S(0,50)$ on a casting using CNC milling machine, an end mill with a diameter of $16$ $mm$ ... $(−8,8), (94,0), (94,44), (8,44), (−8,8)$ $(0,0), (100,0), (100,50), (50,0), (0,0)$
A hole of $20$ $mm$ diameter is to be drilled in a steel block of $40$ $mm$ thickness. The drilling is performed at rotational speed of $400$ $rpm$ and feed rate of $0.1$ $mm/rev$. The required approach and over run of the drill together is equal to the radius of drill. The drilling time (in minute) is $1.00$ $1.25$ $1.50$ $1.75$
A mild steel plate has to be rolled in one pass such that the final plate thickness is $2/3^{rd}$ of the initial thickness, with the entrance speed of $10 \: m/min$ and roll diameter of $500$ $mm$. If the plate widens by $2\%$ during rolling, the exit velocity (in $m/min$) is _______