# GATE Mechanical 2014 Set 1 | Question: 30

The state of stress at a point is given by $\sigma _x=-6 MPa$ ,$\sigma _y=4 MPa$ and $\tau _{xy}=-8 MPa$.The maximum tensile stress in (MPa) at the point is _____

recategorized

## Related questions

Consider a cantilever beam, having negligible mass and uniform flexural rigidity, with length $0.01$ $m$. The frequency of vibration of the beam, with a $0.5$ $kg$ mass attached at the free tip, is $100$ $Hz$. The flexural rigidity (in $N$.$m^2$) of the beam is _______
A metallic rod of $500$ $mm$ length and $50$ $mm$ diameter, when subjected to a tensile force of $100$ $kN$ at the ends, experiences a n increase in its length by $0.5$ $mm$ and a reduction in its diameter by $0.015$ $mm$. The Poisson’s ratio of the rod material is _______
An aluminium alloy (density $2600$ $kg$/$m^3$) casting is to be produced. A cylindrical hole of $100$ $mm$ diameter and $100$ $mm$ length is made in the casting using sand core (density $1600$ $kg$/$m^3$). The net buoyancy force (in newton) acting on the core is _______
During pure orthogonal turning operation of a hollow cylindrical pipe, it is found that the thickness of the chip produced is $0.5$ $mm$. The feed given to the zero degree rake angle tool is $0.2$ $mm/rev$. The shear strain produced during the operation is _______
A shaft is subjected to pure torsional moment. The maximum shear stress developed in the shaft is $100$ $MPa$. The yield and ultimate strengths of the shaft material in tension are $300$ $MPa$ and $450$ $MPa$, respectively. The factor of safety using maximum distortion energy (von-Mises) theory is _______